intermediate work · Regenerative Grazing Demonstration Plot, Bozeman MT
Take a soil-carbon baseline sample at Regenerative Grazing Demonstration Plot, Bozeman MT (2026-07-07)
Regenerative Grazing Demonstration Plot, Bozeman MT's soil carbon level has never been measured, so there's no baseline to track improvement against. Take the sample so future work has something to compare to. Standard: USDA-NRCS/COMET stratified SOC + bulk density; SDG 13.2 Proof: GPS grid + depth cores + bulk-density + COC to lab + management note Method (USDA-NRCS / COMET soil organic carbon baseline (stratified cores + bulk density, lab SOC by dry combustion), ~60-120 min): 1. Confirm the field + management zone; record GPS; lay out stratified sampling points by soil type / slope position. 2. At each point, take cores at defined depth increments (e.g., 0-10 and 10-30 cm); record each depth. 3. Collect a known-volume bulk-density sample at each depth (needed to compute carbon per area). 4. Composite same-depth cores per zone; bag, label, and complete chain-of-custody to the lab for SOC% by dry combustion. 5. Photograph the site, a soil profile, and each sampling point; note land use and management history. 6. Record the GPS grid, depths, bulk-density samples, COC number, and photos into the proof record; sign. Equipment: soil core sampler / auger, bulk-density ring (known volume), depth tape / markers, sample bags + labels, GPS phone, camera, chain-of-custody + data sheet Done when: Stratified cores at defined depths recorded per zone; Bulk-density sample collected per depth increment; Composited samples bagged + chain-of-custody to an accredited lab; GPS grid + profile/point photos + management-history note
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 60–120 minutes. Method of record: USDA-NRCS / COMET soil organic carbon baseline (stratified cores + bulk density, lab SOC by dry combustion)
Bring
- soil core sampler / auger
- bulk-density ring (known volume)
- depth tape / markers
- sample bags + labels
- GPS phone
- camera
- chain-of-custody + data sheet
Steps
- 1. Confirm the field + management zone; record GPS; lay out stratified sampling points by soil type / slope position.
- 2. At each point, take cores at defined depth increments (e.g., 0-10 and 10-30 cm); record each depth.
- 3. Collect a known-volume bulk-density sample at each depth (needed to compute carbon per area).
- 4. Composite same-depth cores per zone; bag, label, and complete chain-of-custody to the lab for SOC% by dry combustion.
- 5. Photograph the site, a soil profile, and each sampling point; note land use and management history.
- 6. Record the GPS grid, depths, bulk-density samples, COC number, and photos into the proof record; sign.
If it does not match the plan
- SOC% is lab-measured, not field-read -> mark result 'pending lab'; make NO on-site carbon claim.
- Very low SOC / bare compacted zones observed -> flag as priority for carbon-building practices.
- Do not claim a carbon credit or retirement from this baseline alone — it establishes a starting point for later re-measurement.
What counts as done
- Stratified cores at defined depths recorded per zone
- Bulk-density sample collected per depth increment
- Composited samples bagged + chain-of-custody to an accredited lab
- GPS grid + profile/point photos + management-history note
Proof is measured against these, not judged by taste.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.