Check whether Older apartment building, Providence RI is ready to switch off gas to electric heat pumps.

A surveyor at Older apartment building photographs the heating and water-heating systems and the closed electrical panel label, then notes the visible insulation levels for a ranked heat-pump readiness list. Read all of it

Not funded yet. Settles as earned credit, $120 proposed.

Vote for it

Proof it takes, the deadline, the level

Proofphoto inventory (HVAC/water fuel+age, panel label, insulation) + GPS + panel amperage/spare-slot count + ranked heat-pump readiness list, all routed to licensed pros
Open until2027-07-07
Levelintermediate

All of it: the words, the place, the proof

Check whether Older apartment building, Providence RI is ready to switch off gas to electric heat pumps. The owner of Older apartment building, Providence RI wants to drop gas for efficient electric heat pumps but doesn't know if the panel and wiring can handle it. Photograph the heating systems and the panel label, note the spare breaker slots, and hand a licensed electrician a ranked readiness list. There is no record of whether the property's electrical panel, ducting and insulation can support a heat pump.

Fund it for $120. The receipt lands onchain once the proof is approved.

What it looks like: A surveyor at Older apartment building photographs the heating and water-heating systems and the closed electrical panel label, then notes the visible insulation levels for a ranked heat-pump readiness list.
A description of this kind of work, not a record that it happened here.
Where: Older apartment building, Providence RI. Open the map
Pay: $120 proposed
This job is not funded yet, so this figure is a proposed price, not money held for the worker. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.
Proof: photo inventory (HVAC/water fuel+age, panel label, insulation) + GPS + panel amperage/spare-slot count + ranked heat-pump readiness list, all routed to licensed pros
This is exactly what gets it approved. Nothing settles without it.
Level: intermediate
Open until: 2027-07-07
Posted by: 0x034F…6c89
The creator wallet. Its signature is what approves proof and settles the wage.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Bring

tablet/clipboard with the readiness checklist
camera
tape measure
flashlight (panel/attic/crawl)
note on existing HVAC + water-heating fuel and age
thermal/IR camera (optional, insulation scope)

Steps

1. Confirm the address + scope with the owner/occupant and arrange access to the mechanical room, electrical panel, and attic/crawl. Observe-and-document only: no panel or HVAC work.
2. Inventory existing space + water heating: fuel (gas/electric/oil/propane), system type + age, ducted vs. ductless suitability, and any combustion appliance present (for later decommission planning by a pro).
3. Photograph the electrical panel label: main service amperage, panel make, and count of used vs. spare breaker slots; note obvious constraints (full panel, subpanels, aluminum branch wiring), as inputs for a licensed electrician's load calc, NOT a load calc yourself.
4. Record the envelope/insulation baseline: attic/wall/floor insulation presence + approximate R-level where visible, and obvious air-leakage points; use IR imaging if available.
5. Assemble a heat-pump readiness summary: what a conversion would likely require (panel capacity, dedicated circuit, ducting/ductless, envelope improvements) as a ranked readiness list, framed as inputs for licensed pros, not a design.
6. Enter photos, GPS/address, the inventory, panel observations, insulation baseline, and the ranked readiness list; sign. Route panel/service and combustion-decommission questions to licensed pros.

What counts as done

Photos of existing heating/water-heating systems with fuel + type + age
Photo of the electrical panel label with service amperage + used/spare breaker slots recorded (observation, not a load calc)
Insulation/air-sealing baseline (levels where visible, obvious leakage points)
GPS / address confirm
Ranked heat-pump readiness list framed as inputs for a licensed electrician / mechanical contractor

Proof is measured against these, not judged by taste.

What is promised, and what is not

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1783444769714_y4mfai9","funderWallet":"0xYOU"}.

Open, but not claimable yet. restricted: regulated. Regulated or permit-required work cannot be claimed on this rail yet. It stays readable; voting and pledging are free, and funding is separate from claiming.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.

Other acts: vote, pledge, fund

Pledge backing, free

Packet WORK_1783444769714_y4mfai9