Anyone can start here · Klamath National Forest revegetation area, Yreka CA

Measure the reforestation plot in the Klamath National Forest revegetation area, Yreka CA (2026-07-10)

The Klamath National Forest revegetation area near Yreka, CA is a registered reforestation project, but its permanent sample plot hasn't had this year's tree tally and leakage-belt walk done — without it, the project's carbon claim has no current field data. Standard: Verra VCS VM0047 ARR permanent-sample-plot inventory + leakage belt; SDG 15.2. Proof: fixed PSP ID + full tree tally + height subsample + leakage-belt walk — Real, Proven, One-of-one Method (Verra VCS VM0047 v1.1 — Methodology for Afforestation, Reforestation and Revegetation (ARR); permanent sample plot (PSP) tree/biomass inventory plus leakage-belt monitoring per the project's Monitoring Plan., ~90-150 min): 1. Navigate to the permanent sample plot (PSP) center; confirm GPS matches the registered plot ID and re-flag the plot boundary if markers are degraded. 2. Photograph the plot center and canopy condition from the fixed photo-point bearing. 3. Tally every tree at or above the minimum DBH threshold inside the plot boundary: species, DBH measured at breast height (1.3m), and status (live/dead/leaning). 4. Measure total height with a hypsometer/clinometer for the height subsample specified by the monitoring plan. 5. Record understory/regeneration counts below the DBH threshold per the monitoring plan's regeneration-tally protocol. 6. Walk the assigned leakage-belt transect around the project boundary; record any new land-use conversion, grazing pressure, or clearing activity with GPS waypoints and photos. 7. Note any disturbance (fire, pest, windthrow, encroachment) within the plot or leakage belt. 8. Enter plot ID, GPS, full tree tally, height subsample, leakage-belt observations, and photos into the proof record; sign. Equipment: GPS-capable phone or survey-grade GPS, diameter tape (DBH tape), hypsometer or clinometer for tree height, permanent plot-boundary markers/flagging, measuring tape for plot radius, data sheet or tablet for tree tally, camera, compass Done when: GPS matches the registered PSP ID within the posting radius, and boundary markers are intact or re-flagged; Every tree at/above the DBH threshold tallied with species, DBH, and status; Height subsample recorded per the monitoring plan's protocol; Leakage-belt transect walked in full with any land-use-change observation logged with GPS and photo

Where: Klamath National Forest revegetation area, Yreka CA
Pay: $80 proposed
This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.
Proof: fixed PSP ID + full tree tally + height subsample + leakage-belt walk — Real, Proven, One-of-one
This is exactly what gets it approved. Nothing settles without it.
Level: entry
Open until: 2027-07-10

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 90–150 minutes. Method of record: Verra VCS VM0047 v1.1 — Methodology for Afforestation, Reforestation and Revegetation (ARR); permanent sample plot (PSP) tree/biomass inventory plus leakage-belt monitoring per the project's Monitoring Plan.

Bring

GPS-capable phone or survey-grade GPS
diameter tape (DBH tape)
hypsometer or clinometer for tree height
permanent plot-boundary markers/flagging
measuring tape for plot radius
data sheet or tablet for tree tally
camera
compass

Steps

1. Navigate to the permanent sample plot (PSP) center; confirm GPS matches the registered plot ID and re-flag the plot boundary if markers are degraded.
2. Photograph the plot center and canopy condition from the fixed photo-point bearing.
3. Tally every tree at or above the minimum DBH threshold inside the plot boundary: species, DBH measured at breast height (1.3m), and status (live/dead/leaning).
4. Measure total height with a hypsometer/clinometer for the height subsample specified by the monitoring plan.
5. Record understory/regeneration counts below the DBH threshold per the monitoring plan's regeneration-tally protocol.
6. Walk the assigned leakage-belt transect around the project boundary; record any new land-use conversion, grazing pressure, or clearing activity with GPS waypoints and photos.
7. Note any disturbance (fire, pest, windthrow, encroachment) within the plot or leakage belt.
8. Enter plot ID, GPS, full tree tally, height subsample, leakage-belt observations, and photos into the proof record; sign.

If it does not match the plan

Leakage-belt transect shows new clearing, conversion, or grazing pressure not present in the prior round -> flag immediately for the project proponent; this is a reportable leakage event, not a routine note.
Plot disturbance (fire/pest/windthrow) affects a material share of tallied trees -> flag the plot as compromised for this monitoring period rather than averaging it into the stand-level estimate.

What counts as done

GPS matches the registered PSP ID within the posting radius, and boundary markers are intact or re-flagged
Every tree at/above the DBH threshold tallied with species, DBH, and status
Height subsample recorded per the monitoring plan's protocol
Leakage-belt transect walked in full with any land-use-change observation logged with GPS and photo

Proof is measured against these, not judged by taste.

Claim it on the board

Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.