Replenish the worn playground fall-zone surfacing, West Side Elementary

Years of use have worn the engineered wood fiber under West Side Elementary's swings down below the ASTM F1292 depth required to cushion a fall. Standard: Community-coordination standard, documentation-and-coordination-only; canonical hazard severity tag (minor|moderate|severe|critical). No repair authority. Proof: before/after depth measurements at 5+ points + ASTM target confirmation + GPS Method (Community-coordination standard, documentation-and-coordination-only; canonical hazard severity tag (minor|moderate|severe|critical). No repair authority.): 1. Measure existing fall-zone material depth at 5+ points under swings/climbers with a ruler; photograph each. 2. Confirm the replacement material matches the existing certified engineered wood fiber or approved equivalent. 3. Rake out compacted material and add fresh material to the ASTM F1292 target depth for the equipment's fall height. 4. Re-measure depth at the same points and photograph the finished, leveled surface. Done when: before/after depth measurements at 5+ points + ASTM target confirmation + GPS

Where

West Side Elementary School, 810 South 6th Street, Worland, WY 82401

Pay

$95 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

before/after depth measurements at 5+ points + ASTM target confirmation + GPS

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-09-01

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 30–60 minutes. Method of record: Community-coordination hazard survey (documentation + coordination only; severity-tagged)

Bring

• GPS phone
• camera
• hi-vis vest
• severity-tag reference (minor|moderate|severe|critical)

Steps

1. 1. Walk the corridor from a safe path; record a GPS waypoint at each hazard.
2. 2. Photograph each hazard.
3. 3. Classify the hazard type and assign a severity tag (minor|moderate|severe|critical).
4. 4. Name the responsible handoff target (BID / city agency / utility).
5. 5. Enter each hazard's type, severity, GPS, photo, and handoff target into the proof record; sign.

If it does not match the plan

• NEVER perform repair or enter the roadway/public right-of-way -> documentation and coordination only.
• Any severity:critical (e.g., live downed wire, open utility vault) -> flag immediately to the responsible agency; keep clear.

What counts as done

• Each hazard photographed with a GPS waypoint
• Severity tag assigned per hazard
• Hazard type classified
• Named handoff target per hazard

Proof is measured against these, not judged by taste.