Score St. Aloysius Catholic Church's fellowship hall against the Energy petal

St. Aloysius Catholic Church has served the Hilltop since 1906, and the fellowship hall's envelope and heating system have never been scored against the Energy petal to build a sequenced retrofit plan. Standard: ASHRAE Level 1 energy audit + Living Building Challenge Energy petal screening. Proof: Completed Energy-petal checklist with photos per system + Ranked plan naming the follow-on doing jobs + Parish facilities acknowledgment photo or note Method (ASHRAE Level 1 energy audit + Living Building Challenge Energy petal screening.): 1. Walk the fellowship hall and rectory with the parish facilities contact, recording envelope condition, heating equipment age, and panel labels (photograph labels only — do not open equipment). 2. Score each system against the Energy-petal checklist (envelope, electrification, generation). 3. Rank the shortfalls into a sequenced plan naming the matching job for each (weatherstrip -> insulate -> ventilation). 4. Deliver the one-page scorecard to the parish facilities contact and photograph it handed over. Done when: Completed Energy-petal checklist with photos per system + Ranked plan naming the follow-on doing jobs + Parish facilities acknowledgment photo or note

Where

St. Aloysius Catholic Church, 2165 W Broad St, Columbus OH 43223

Pay

$95 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Completed Energy-petal checklist with photos per system + Ranked plan naming the follow-on doing jobs + Parish facilities acknowledgment photo or note

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-09-01

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 60–120 minutes. Method of record: ASHRAE Level 1 energy audit

Bring

• tablet/clipboard
• tape measure
• light meter (lighting scope)
• clamp thermometer (refrigeration scope)
• 12-month utility bills
• camera
• ladder + spotter (high fixtures)

Steps

1. 1. Confirm the address; arrange a staff escort for mechanical/back-of-house.
2. 2. Photograph HVAC, lighting, envelope, and any in-scope systems.
3. 3. Inventory systems: HVAC type + age; lighting fixture count/type/wattage; refrigeration units; envelope condition.
4. 4. Summarize 12 months of utility use (kWh / therms) from the bills.
5. 5. Take the in-scope measurements (light levels, unit temperatures, seal condition).
6. 6. Rank no-cost/low-cost measures, then capital measures, with rough savings logic.
7. 7. Enter inventory, measurements, utility summary, photos, and the ranked measure list; sign.

If it does not match the plan

• Knob-and-tube, ungrounded or overheated wiring, scorched outlets, or a hot electrical panel -> STOP: do not operate the circuit; route to a licensed electrician and restrict use (NEC / fire hazard).
• Gas odor, or a combustion appliance with absent/blocked venting (backdrafting / CO risk) -> STOP: evacuate, ventilate, call the gas utility. The agent escalates, never relights or adjusts gas.
• Any live-electrical/gas hazard -> document, do not touch, flag for a licensed pro.
• Refrigeration unit out of food-safe range -> flag as both energy and food-safety risk.
• Suspected asbestos/lead in materials -> flag and stop.

What counts as done

• System inventory complete for the in-scope equipment
• 12-month utility use summary recorded
• In-scope measurements recorded with units
• Ranked no-cost/low-cost + capital measure list produced

Proof is measured against these, not judged by taste.