4340 Fairmount Avenue, City Heights, San Diego, CA 92105
Repair the leaking exterior hose bib.
A worker shuts off the interior isolation valve at 4340 Fairmount Avenue and replaces the worn part inside the leaking hose bib with hand tools, restoring full pressure with no drip. Read all of it
Not funded yet. Settles as earned credit, $220 proposed.
Proof it takes, the deadline, the level
- Proofbefore/after photo pairs + shutoff-valve confirmation + drip-test video + GPS
- Open until2027-07-18
- Levelintermediate
All of it: the words, the place, the proof
Repair the dripping exterior hose bib at 4340 Fairmount Avenue in San Diego. The rear bib drips continuously from a worn valve, wasting water every hour unnoticed.
Fund it for $220. The receipt lands onchain once the proof is approved.
Safety, read before you claim
Shut the interior isolation valve before disassembly; standard hand tools only. If corrosion extends beyond a simple washer/cartridge swap, stop and flag for a licensed plumber.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- Photograph or record video of the active drip at 4340 Fairmount Avenue before work.
- Shut the interior isolation valve and photograph the closed valve before disassembly.
- Use standard hand tools only to remove the rear hose-bib stem or cartridge.
- Stop the repair and flag it for a licensed plumber if corrosion extends beyond a simple washer or cartridge swap.
- Install the matching washer or cartridge and reassemble the hose bib with standard hand tools.
- Restore full pressure and photograph or record video showing no drip.
- Record the repair part, isolation-valve proof, full-pressure result, date, and GPS.
What counts as done
- Before photo/video of the active drip
- Photo of the interior isolation valve confirmed shut before work
- After photo/video showing no drip under full pressure
Proof is measured against these, not judged by taste.
The standard this serves
Water Efficiency. Water efficiency is the quiet discipline of wasting nothing indoors. The EPA's WaterSense program sets the marks: how many gallons a minute a faucet should pass, how to find the leak that runs a toilet all night, how a household's water bill tells a story. Mastery looks like an auditor who can walk a home in an hour and find every hidden gallon. The skill is built one fixture at a time, which is exactly what this packet asks: measure one flow, find one leak, record one truth about where the water goes.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1784341309178_hvah15t","funderWallet":"0xYOU"}.
Open, but not claimable yet. restricted: regulated. Regulated or permit-required work cannot be claimed on this rail yet. It stays readable; voting and pledging are free, and funding is separate from claiming.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1784341309178_hvah15t