Install a public bench on the 5th Avenue corridor.

A worker tightens the anchor fasteners of a new public bench with a torque wrench at 3500 block of 5th Avenue, so the bench stands level where the spot was bare. Read all of it

Not funded yet. Settles as earned credit, $660 proposed.

Vote for it

Proof it takes, the deadline, the level

Proofbefore/after photos + footing-stability check
Open until2027-07-18
Levelintermediate

All of it: the words, the place, the proof

Install a public bench on the 5th Avenue corridor. There's nowhere to sit along the 5th Avenue stretch between the homes and McClatchy Park, elders and parents with strollers have no rest point.

Fund it for $660. The receipt lands onchain once the proof is approved.

What it looks like: A worker tightens the anchor fasteners of a new public bench with a torque wrench at 3500 block of 5th Avenue, so the bench stands level where the spot was bare.
A description of this kind of work, not a record that it happened here.
Where: 3500 block of 5th Avenue, Oak Park, Sacramento, CA 95817. Open the map
Pay: $660 proposed
This job is not funded yet, so this figure is a proposed price, not money held for the worker. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.
Proof: before/after photos + footing-stability check
This is exactly what gets it approved. Nothing settles without it.
Level: intermediate
Open until: 2027-07-18
Posted by: 0x034F…6c89
The creator wallet. Its signature is what approves proof and settles the wage.

Safety, read before you claim

Anyone able to anchor a bench to the manufacturer's instructions can do this under a right-of-way or parks permit. Use poured-footing anchoring per the manufacturer's instructions, keep the ADA clear-path width beside the bench, and never drill before the 811 locate is confirmed; wear hearing protection.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Bring

right-of-way or parks permit + the 811 utility-locate confirmation
the asset kit with its manufacturer anchoring instructions and specified anchors
rotary hammer or drill with the anchor-spec bit, plus dust extraction or a wet method
torque wrench set to the anchor spec + 2-ft level + tape measure
cones or barricades and a maintained pedestrian path
camera + GPS phone

Steps

1. ASSESS: photograph the location as found, confirm the permit covers this exact placement, and confirm the 811 locate is honored and marked before any drilling or digging.
2. Set cones or barricades and keep a walkable path around the work; never work from a traffic lane.
3. Mark the anchor pattern from the manufacturer's template, and check the clear width left for the accessible route (36 in minimum) before a single hole is drilled.
4. Drill and set the specified anchors with dust control, then place the asset and bring every fastener to the manufacturer's torque value.
5. VERIFY: level check on the seat, top rail or post; torque-check each anchor and record the value; confirm the asset does not block the accessible route or a curb ramp landing.
6. Photograph the finished install from the same vantage as the before photo, log the anchor torque and the permit reference, and enter both in the proof record.

What counts as done

Before photo of the bare spot
After photo of the anchored bench
Footing-stability check note

Proof is measured against these, not judged by taste.

The standard this serves

Civic Safety Reporting. Civic safety is the craft of noticing for your neighbors: the burned-out light over a dark corner, the sidewalk lip waiting to trip someone, the overgrown hedge hiding a crosswalk. This standard is documentation and coordination only, no repairs: see the hazard clearly, grade how serious it is, record it with a photo and a place, and route it to the people with the authority to fix it. Mastery looks like a neighborhood where problems are found while they are still small. This packet is one clear-eyed report, and one clear report is how every fix begins.

What is promised, and what is not

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1784343979400_hitnnya","funderWallet":"0xYOU"}.

Open, but not claimable yet. restricted: permit-required. Regulated or permit-required work cannot be claimed on this rail yet. It stays readable; voting and pledging are free, and funding is separate from claiming.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.

Other acts: vote, pledge, fund

Pledge backing, free

Packet WORK_1784343979400_hitnnya