Top up the worn playground surfacing.

The fall-zone surfacing under the swings at McClatchy Park has worn thin in patches, well below the depth CPSC guidelines call for.

Where

McClatchy Park, 3500 5th Avenue, Sacramento, CA 95817 · Open the map

Pay

$100 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash — recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof

before/after depth photos + depth measurement

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2027-07-18

Posted by

0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Bring

• the surfacing material specified for this playground (engineered wood fiber, loose fill or the poured-in-place patch kit)
• depth probe or a marked measuring rod + tape measure
• rake, shovel, wheelbarrow and a screed board
• the equipment's posted fall height and the surfacing manufacturer's depth table
• site closure signage and barrier tape
• gloves and eye protection
• camera + GPS phone

Steps

1. 1. ASSESS: photograph the use zone as found and probe the surfacing depth at the fall-critical points (under swings, at slide exits, beneath climbers), recording every reading.
2. 2. Close the use zone with signage and barrier tape before any material is moved; a partially filled use zone is more dangerous than a worn one.
3. 3. Remove contamination and compacted material from the repair area, and check the sub-base drains rather than holding water.
4. 4. Place the specified surfacing to the depth the manufacturer's table gives for this equipment's posted fall height, raking level across the whole use zone rather than only the worn patch.
5. 5. VERIFY: re-probe the same fall-critical points and record the depths; confirm each meets or exceeds the table value for the posted fall height.
6. 6. Confirm the use-zone extent still meets the CPSC handbook clearance around the equipment, then reopen and photograph from the before vantage; enter depths and photos in the proof record.

What counts as done

• Before photo + depth measurement of the worn patch
• After photo + depth measurement of the topped-up surfacing
• Material note (engineered wood fiber or equivalent)

Proof is measured against these, not judged by taste.

The standard this serves

Civic Safety Reporting. Civic safety is the craft of noticing for your neighbors: the burned-out light over a dark corner, the sidewalk lip waiting to trip someone, the overgrown hedge hiding a crosswalk. This standard is documentation and coordination only, no repairs: see the hazard clearly, grade how serious it is, record it with a photo and a place, and route it to the people with the authority to fix it. Mastery looks like a neighborhood where problems are found while they are still small. This packet is one clear-eyed report, and one clear report is how every fix begins.