Patch the crumbling curb and gutter along the 2000 block of Gale Ave in Long Beach's Wrigley neighborhood

Decades of freeze-thaw-free but truck-traffic-heavy wear have spalled the curb and gutter line along the 2000 block of Gale Ave in Long Beach's Wrigley neighborhood, catching bike tires and shedding chunks into the storm system. A surface patch closes it before it becomes a full panel failure. Standard: Community-coordination standard, documentation-and-coordination-only; canonical hazard severity tag (minor|moderate|severe|critical). No repair authority. Proof: before/after photo pairs per spall + materials note + GPS Method (Community-coordination standard, documentation-and-coordination-only; canonical hazard severity tag (minor|moderate|severe|critical). No repair authority.): 1. Walk the curb and gutter line along the 2000 block of Gale Ave in Long Beach's Wrigley neighborhood and photograph every spalled or crumbling section, noting its size. 2. Wire-brush loose material from each spall by hand — surface prep only, nothing below the existing curb depth. 3. Mix and place hydraulic cement or concrete patch compound into the prepped spall, feathering the edge to match the existing profile. 4. Cure per product instructions, then photograph the finished patch from the same vantage. Done when: before/after photo pairs per spall + materials note + GPS

Where

the 2000 block of Gale Ave, Wrigley neighborhood, Long Beach, CA 90806

Pay

$90 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

before/after photo pairs per spall + materials note + GPS

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-09-01

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 30–60 minutes. Method of record: Community-coordination hazard survey (documentation + coordination only; severity-tagged)

Bring

• GPS phone
• camera
• hi-vis vest
• severity-tag reference (minor|moderate|severe|critical)

Steps

1. 1. Walk the corridor from a safe path; record a GPS waypoint at each hazard.
2. 2. Photograph each hazard.
3. 3. Classify the hazard type and assign a severity tag (minor|moderate|severe|critical).
4. 4. Name the responsible handoff target (BID / city agency / utility).
5. 5. Enter each hazard's type, severity, GPS, photo, and handoff target into the proof record; sign.

If it does not match the plan

• NEVER perform repair or enter the roadway/public right-of-way -> documentation and coordination only.
• Any severity:critical (e.g., live downed wire, open utility vault) -> flag immediately to the responsible agency; keep clear.

What counts as done

• Each hazard photographed with a GPS waypoint
• Severity tag assigned per hazard
• Hazard type classified
• Named handoff target per hazard

Proof is measured against these, not judged by taste.