intermediate work · the 2000 block of Gale Ave, Wrigley neighborhood, Long Beach, CA 90806
Clear and check the storm-drain inlets near the 2000 block of Gale Ave in Long Beach's Wrigley neighborhood (2026-07-17)
The curb inlets near the 2000 block of Gale Ave in Long Beach's Wrigley neighborhood clog with leaves and litter, so storm runoff ponds at the corners and carries the block's trash toward the ocean. Keeping the grates clear is real, repeating stormwater work. Standard: Storm drain inlet surface cleaning + minor repair — EPA NPDES MS4 stormwater BMP maintenance; surface work from the curb only. SDG 6/11. Proof: before/after photo pairs per inlet + water-flow video + disposal photo + GPS Method (Storm drain inlet surface cleaning + minor repair — EPA NPDES MS4 stormwater BMP maintenance; surface work from the curb only. SDG 6/11.): 1. Photograph each inlet as found (grate, apron, gutter approach) and record GPS. 2. Set cones at the curb work zone; work from the sidewalk/curb only — never enter, reach into, or open the drain structure. 3. Clear debris and litter from the grate surface and gutter approach with rake/grabber; bag it with green waste separated. 4. Re-seat a displaced grate only if it lifts freely by hand from above; anything more gets documented, not attempted. 5. Photograph the cleared inlet from matching vantage, pour a bucket of clean water to show flow, and report any damage to the MS4/311 line. Done when: before/after photo pairs per inlet + water-flow video + disposal photo + GPS
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 60–180 minutes. Method of record: Storm drain inlet surface cleaning + minor grate/apron repair per EPA MS4 stormwater BMP maintenance — SURFACE WORK FROM THE CURB ONLY; never enter the drain, never lift beyond the grate; assess→clear/repair→verify
Bring
- heavy work gloves + hi-vis vest + grabber tool and rake
- contractor bags for debris (landscape debris separated from trash)
- camera + measuring tape
- cones for the curb work zone (stay out of the traffic lane)
Steps
- 1. ASSESS: photograph the inlet as found (grate, apron, gutter approach), note blockage type and any damage (broken grate, displaced apron concrete), and record GPS.
- 2. Set cones at the curb work zone; all work is from the sidewalk/curb — never step into the traffic lane and never enter, reach into, or open the drain structure.
- 3. Clear debris, sediment, and litter from the grate surface and the gutter approach with the rake/grabber; bag and dispose of it properly (green waste separated).
- 4. Minor repair within surface scope: re-seat a displaced grate that lifts freely by hand from above, patch apron spalls with cold-patch where the city standard allows; anything more is documented, not attempted.
- 5. VERIFY: photograph the cleared inlet from the same vantage, pour a bucket of clean water at the gutter approach to show flow into the inlet, and report any structural damage to the municipal stormwater line (311/MS4 contact) with photos.
If it does not match the plan
- Anything requiring entry, reaching into the barrel, or lifting a seized grate -> STOP: document and report to the municipality; surface work only.
- Suspected illicit discharge (odor, sheen, off-color flow) -> do not touch; photograph from the curb and report to the MS4 hotline immediately.
- Inlet on a high-speed road with no safe curb work zone -> document from the sidewalk only and report; never work in the traffic lane.
What counts as done
- Before/after photos from matching vantage show the grate and gutter approach clear
- Water-flow photo/video shows drainage into the inlet with no ponding at the approach
- Debris bagged and disposed (photo), green waste separated
- Any structural damage reported to the municipal stormwater contact with the report reference recorded
Proof is measured against these, not judged by taste.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.