Plant native riparian buffer species at the river mouth, the LA River mouth at Golden Shore Marine Biological Reserve (2026-07-17)

The survey above named bare, eroding bank segments at the river mouth. Native shrub/tree planting is the buffer repair that stabilizes the bank and restores real habitat. Standard: US EPA Rapid Bioassessment Protocols + SDG 6.3/6.6 water quality & ecosystems; INAT01 stewardship waypoint protocol. Proof: before/after photos + species/count log + GPS Method (US EPA Rapid Bioassessment Protocols + SDG 6.3/6.6 water quality & ecosystems; INAT01 stewardship waypoint protocol.): 1. Photograph the bare bank segment and confirm the native plant list matches the site conditions. 2. Dig planting holes at proper spacing above the high-water line and set native plugs/container plants. 3. Water in thoroughly and mulch around (not touching) each plant base. 4. Photograph the finished planting and log species and count. Done when: before/after photos + species/count log + GPS

Where

Golden Shore Marine Biological Reserve, LA River mouth, Long Beach, CA 90802

Pay

$100 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

before/after photos + species/count log + GPS

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-08-17

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 30–60 minutes. Method of record: EPA dry-weather / AMD field screening

Bring

• GPS phone
• pH meter or strips
• conductivity meter
• ammonia + iron test kit as specified
• surfactant screen if specified
• gloves
• camera

Steps

1. 1. Navigate to the outfall/reach; record GPS; photograph it, capturing any visible flow or staining.
2. 2. Note whether flow is present in dry weather (yes/no).
3. 3. Measure and record pH, conductivity, and each specified analyte per kit instructions.
4. 4. Log any color, odor, floc, or aquatic-life observation.
5. 5. Enter all readings with units, GPS, time, and photos into the proof record; sign.

If it does not match the plan

• Dry-weather flow present with elevated conductivity/ammonia/surfactants -> flag suspected illicit discharge for the responsible agency.
• pH < 6 with visible iron floc -> tag suspected acid mine drainage; recommend metals lab panel.

What counts as done

• pH + conductivity recorded with units
• Each specified analyte recorded with a value
• Dry-weather flow present? recorded yes/no
• GPS waypoint + timestamped photo

Proof is measured against these, not judged by taste.