intermediate work · the blocks facing Maryvale Park, Maryvale, Phoenix, AZ 85031

Service the evaporative cooler pads and belt on a home on the blocks facing Maryvale Park, Maryvale, Phoenix, AZ 85031 (2026-07-17)

Much of Maryvale's older housing still leans on a window- or side-yard-mounted evaporative ('swamp') cooler through the worst of Phoenix's heat, and a season of hard water leaves the pads scaled and the belt slipping right when the cooling is needed most; fresh pads and a checked belt restore real cooling capacity. Standard: ASHRAE Level 1 energy audit + Living Building Challenge Energy petal screening. Proof: before photo of the scaled/worn pads and belt + after photo of the new pads installed + belt-tension check note + GPS Method (ASHRAE Level 1 energy audit, ~60-120 min): 1. Confirm the address; arrange a staff escort for mechanical/back-of-house. 2. Photograph HVAC, lighting, envelope, and any in-scope systems. 3. Inventory systems: HVAC type + age; lighting fixture count/type/wattage; refrigeration units; envelope condition. 4. Summarize 12 months of utility use (kWh / therms) from the bills. 5. Take the in-scope measurements (light levels, unit temperatures, seal condition). 6. Rank no-cost/low-cost measures, then capital measures, with rough savings logic. 7. Enter inventory, measurements, utility summary, photos, and the ranked measure list; sign. Equipment: tablet/clipboard, tape measure, light meter (lighting scope), clamp thermometer (refrigeration scope), 12-month utility bills, camera, ladder + spotter (high fixtures) Done when: System inventory complete for the in-scope equipment; 12-month utility use summary recorded; In-scope measurements recorded with units; Ranked no-cost/low-cost + capital measure list produced

Where
the blocks facing Maryvale Park, Maryvale, Phoenix, AZ 85031
Pay
$75 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof
before photo of the scaled/worn pads and belt + after photo of the new pads installed + belt-tension check note + GPS

This is exactly what gets it approved. Nothing settles without it.

Level
intermediate
Open until
2027-07-18

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 60–120 minutes. Method of record: ASHRAE Level 1 energy audit

Bring

Steps

  1. 1. Confirm the address; arrange a staff escort for mechanical/back-of-house.
  2. 2. Photograph HVAC, lighting, envelope, and any in-scope systems.
  3. 3. Inventory systems: HVAC type + age; lighting fixture count/type/wattage; refrigeration units; envelope condition.
  4. 4. Summarize 12 months of utility use (kWh / therms) from the bills.
  5. 5. Take the in-scope measurements (light levels, unit temperatures, seal condition).
  6. 6. Rank no-cost/low-cost measures, then capital measures, with rough savings logic.
  7. 7. Enter inventory, measurements, utility summary, photos, and the ranked measure list; sign.

If it does not match the plan

What counts as done

Proof is measured against these, not judged by taste.

Claim it on the board

Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.