Repair the public drinking fountain, Dodge Park

The drinking fountain near the Dodge Park skate spot has run dry for weeks, sending thirsty skaters and trail users to buy bottled water instead. Standard: Community-coordination standard, documentation-and-coordination-only; canonical hazard severity tag (minor|moderate|severe|critical). No repair authority. Proof: Before photo/video of the dry fountain + Repair photos + After photo/video of the restored stream Method (Community-coordination standard, documentation-and-coordination-only; canonical hazard severity tag (minor|moderate|severe|critical). No repair authority.): 1. Photograph the fountain and confirm whether the issue is the valve, the bubbler head, or supply pressure. 2. Shut off the isolation valve and disassemble the faulty component. 3. Replace the worn valve/bubbler part and reassemble. 4. Turn the water back on and photograph a strong, properly-arced stream. Done when: Before photo/video of the dry fountain + Repair photos + After photo/video of the restored stream

Where

Dodge Park, 667 Sullivant Ave, Columbus OH 43215

Pay

$65 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Before photo/video of the dry fountain + Repair photos + After photo/video of the restored stream

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-09-01

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 30–60 minutes. Method of record: Community-coordination hazard survey (documentation + coordination only; severity-tagged)

Bring

• GPS phone
• camera
• hi-vis vest
• severity-tag reference (minor|moderate|severe|critical)

Steps

1. 1. Walk the corridor from a safe path; record a GPS waypoint at each hazard.
2. 2. Photograph each hazard.
3. 3. Classify the hazard type and assign a severity tag (minor|moderate|severe|critical).
4. 4. Name the responsible handoff target (BID / city agency / utility).
5. 5. Enter each hazard's type, severity, GPS, photo, and handoff target into the proof record; sign.

If it does not match the plan

• NEVER perform repair or enter the roadway/public right-of-way -> documentation and coordination only.
• Any severity:critical (e.g., live downed wire, open utility vault) -> flag immediately to the responsible agency; keep clear.

What counts as done

• Each hazard photographed with a GPS waypoint
• Severity tag assigned per hazard
• Hazard type classified
• Named handoff target per hazard

Proof is measured against these, not judged by taste.