Install a public bench, the Sanislo Elementary School frontage on SW Myrtle St, Delridge, Seattle, WA 98106

This corner has a bus stop and a steep uphill walk in both directions but nowhere to sit — a poured-footing bench gives Delridge's transit riders and older residents real relief on the grade. Standard: Community-coordination standard, documentation-and-coordination-only; canonical hazard severity tag (minor|moderate|severe|critical). No repair authority. Proof: before/after photos + footing/anchor detail photo + level check + GPS Method (Community-coordination standard, documentation-and-coordination-only; canonical hazard severity tag (minor|moderate|severe|critical). No repair authority.): 1. Confirm the placement with the city right-of-way rules and photograph the empty site. 2. Dig and pour a footing per the bench manufacturer's anchor spec; cure per instructions. 3. Anchor the bench to the cured footing and check for level and stability. 4. Photograph the finished, installed bench and log the anchor/footing detail. Done when: before/after photos + footing/anchor detail photo + level check + GPS

Where

the Sanislo Elementary School frontage on SW Myrtle St, Delridge, Seattle, WA 98106

Pay

$130 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

before/after photos + footing/anchor detail photo + level check + GPS

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-09-01

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 30–60 minutes. Method of record: Community-coordination hazard survey (documentation + coordination only; severity-tagged)

Bring

• GPS phone
• camera
• hi-vis vest
• severity-tag reference (minor|moderate|severe|critical)

Steps

1. 1. Walk the corridor from a safe path; record a GPS waypoint at each hazard.
2. 2. Photograph each hazard.
3. 3. Classify the hazard type and assign a severity tag (minor|moderate|severe|critical).
4. 4. Name the responsible handoff target (BID / city agency / utility).
5. 5. Enter each hazard's type, severity, GPS, photo, and handoff target into the proof record; sign.

If it does not match the plan

• NEVER perform repair or enter the roadway/public right-of-way -> documentation and coordination only.
• Any severity:critical (e.g., live downed wire, open utility vault) -> flag immediately to the responsible agency; keep clear.

What counts as done

• Each hazard photographed with a GPS waypoint
• Severity tag assigned per hazard
• Hazard type classified
• Named handoff target per hazard

Proof is measured against these, not judged by taste.