Anyone can start here · The Church of Jesus Christ of Latter-day Saints meetinghouse on Bastanchury Road, Yorba Linda, CA 92886
Plant a multi-species food-forest guild on the meetinghouse grounds, The Church of Jesus Christ of Latter-day Saints meetinghouse on Bastanchury Road, Yorba Linda, CA 92886 (2026-07-17)
This meetinghouse's single raised bed can't grow fruit trees or perennial shrubs, and the grounds have real unused space beyond it; planting a layered guild of fruit trees, berry shrubs, and perennial herbs turns that space into a lasting food source for ward socials and community-service projects. Standard: Community-garden cultivation practice; SDG 2/11 Proof: GPS boundary + before/after photos + species/guild layout list + planting-depth confirm + watering-in record Method (USDA/SARE sustainable vegetable production + Cooperative Extension Master Gardener practices; People's Garden bed establishment. Hand-tool, DIY-safe food growing on tested/known-clean soil or raised beds., ~60-120 min): 1. Confirm the bed location inside the posting radius; record the GPS waypoint and photograph the bed before work. 2. Clear weeds and debris; loosen the top 8-12 inches with a fork/broadfork without inverting the soil profile. 3. Spread 1-2 inches of finished compost and rake the bed level. 4. Sow seeds to the depth/spacing on the packet, or set transplants at their correct depth, in labeled rows. 5. Water in gently to settle the soil around seeds/roots. 6. Apply a light straw/leaf mulch between rows to hold moisture, keeping it off seedling stems. 7. Record the crop plan, spacing, and a watering/harvest cadence for the next visit. 8. Enter crop list, GPS, before/after photos, and the care cadence into the proof record; sign. Equipment: GPS-capable phone, camera, garden fork/broadfork + hand trowel, finished compost + rake, seeds or transplants (labeled), mulch (straw/leaf), watering can or hose Done when: GPS waypoint recorded inside the posting radius; Before and after photos of the planted bed; Crops sown/transplanted at packet-correct depth and spacing, in labeled rows; Bed watered in and mulched, with a watering/harvest cadence recorded
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 45–90 minutes. Method of record: ANSI A300 Part 6 (Planting) + ISA Best Management Practices for tree planting & establishment; Arbor Day Foundation planting standard. DIY-safe volunteer planting on cleared, utility-marked ground; no mechanized or utility-conflict digging.
Bring
- GPS-capable phone
- camera
- round-point shovel + digging fork
- hand pruners
- mulch (wood chips) + measuring stick
- watering can or hose
- gloves + closed-toe boots
Steps
- 1. Confirm the planting spot is inside the posting radius and clear of marked utilities (811 locate honored); record the GPS waypoint.
- 2. Photograph the bare site and the nursery stock (label/species visible) before planting.
- 3. Dig the hole 2-3x the root-ball width and no deeper than the root ball, so the root flare will sit at or just above grade.
- 4. Remove the container or cut away burlap/wire, gently loosen circling roots, and set the tree with the root flare visible at grade.
- 5. Backfill with the native soil in layers, firming out air pockets; do not bury the root flare or amend heavily.
- 6. Build a shallow watering basin, water in slowly until the backfill is saturated, and apply 2-3 inches of mulch kept 3 inches off the trunk.
- 7. Stake only if the tree cannot stand on its own; use two loose ties that allow trunk movement, and note a removal date within one year.
- 8. Record species, GPS, before/after photos, root-flare-at-grade confirmation, mulch depth, and water applied into the proof record; sign.
If it does not match the plan
- Unmarked or suspected buried utility, or the 811 locate is not honored -> STOP: do not dig; reschedule after a confirmed locate.
- Root ball is dry, circling/kinked, or the trunk is wounded -> do not plant as-is; soak/correct or reject the stock and note it, rather than establish a failing tree.
- Right-of-way, overhead-line conflict, or a species/site mismatch -> flag for the site steward and choose an approved spot/species; never plant into a conflict.
What counts as done
- GPS waypoint recorded inside the posting radius on utility-cleared ground
- Before and after photos showing the root flare visible at grade
- Mulch applied 2-3 inches deep and held off the trunk, with a watering basin formed and watered in
- Species and any staking (with a removal date) recorded in the proof
Proof is measured against these, not judged by taste.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.