Anyone can start here · High-desert parcel area near Camp Rock Rd, Lucerne Valley, CA 92356
Plant and basin-water honey mesquite on the Lucerne Valley parcel (2026-07-17)
The parcel has no tree layer left; honey mesquite is the high-desert's keystone — shade, nitrogen, bird habitat — and each planted, basined seedling is a decades-long asset started in an afternoon. Standard: UN SDG 15 — protect, restore and promote sustainable use of terrestrial ecosystems (15.3 land degradation neutrality). Proof: before/after photos per tree + GPS tree log + cage/basin visible in after photos Method (UN SDG 15 — protect, restore and promote sustainable use of terrestrial ecosystems (15.3 land degradation neutrality).): 1. Flag planting spots at runoff catch points per the plot plan; photograph each before. 2. Dig and plant each container mesquite deep enough to protect the taproot; form a generous watering basin. 3. Deep-water in, mulch the basin, and cage against browse. 4. Photograph each finished planting (basin + cage) and log GPS per tree. Done when: before/after photos per tree + GPS tree log + cage/basin visible in after photos
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 60–180 minutes. Method of record: SDG 15 (Life on Land) target 15.1/15.5 — site-level terrestrial restoration: plant, tend, and record survival so the gain is measurable a year later, not just on the day
Bring
- gloves + closed-toe boots
- spade or planting bar
- 5-gallon water container or hose access
- mulch (wood chip, 5cm depth)
- measuring tape
- phone with GPS + camera
- site plan or marked planting locations
Steps
- 1. Photograph the site BEFORE touching anything, with GPS on and a timestamp visible.
- 2. Confirm you are inside the posting radius; record the waypoint.
- 3. Call 811 (or local utility locate) before ANY digging deeper than 30cm. Do not dig on an unlocated site.
- 4. Dig each hole twice the width of the root ball and no deeper — the root flare must sit level with grade, never buried.
- 5. Set the plant, backfill with native soil only (no fertiliser at planting), and firm gently to remove air pockets.
- 6. Water in immediately until the soil is saturated, roughly 10-20L per woody plant.
- 7. Mulch to 5cm depth, pulled back 8cm from the stem so the bark never sits wet.
- 8. Photograph AFTER, from the same position as the before shot, and record species, count, and spacing.
If it does not match the plan
- Utilities not located, or locate marks cross your dig area -> stop, document, do not dig.
- Soil is saturated or frozen -> reschedule; planting into either kills survival rate.
- Species is listed invasive in this jurisdiction -> do not plant; document and flag the packet.
- Root ball is dry on arrival -> soak fully before planting or survival is forfeit.
- Slope steeper than 3:1 -> add erosion control (wattle or matting) or the planting washes out.
What counts as done
- Before and after photos from the same position, both with GPS inside the posting radius and legible timestamps
- Root flare visible at grade on every plant in the after photo — not buried, not proud
- Mulch present at ~5cm and pulled back from every stem
- Species, count, and spacing recorded in the proof record
- 811/utility locate confirmed in the record for any dig over 30cm
Proof is measured against these, not judged by taste.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.