Photograph the drinking fountains at Lamont Park and log which ones work (2026-07-18)

Lamont's small water system has a long arsenic-compliance history; the public fountains at the park are the community's most visible tap. Nobody keeps a running record of which fountains run, which are broken, and what notices are posted — that record is the first rung toward safe point-of-use water at every public site in town. Standard: EPA Safe Drinking Water Act public-notification rules; CA SWRCB SAFER program (failing/at-risk systems list). SDG 6. Proof: photo set of every fountain + posted notices + GPS + condition log Method (EPA Safe Drinking Water Act public-notification rules; CA SWRCB SAFER program (failing/at-risk systems list). SDG 6.): 1. Walk Lamont Park's public areas and locate every drinking fountain and bottle filler. 2. Photograph each unit close-up and in context; note whether it runs, dribbles, or is dry. 3. Photograph any posted water-system notice at the park or park office exactly as posted. 4. Log GPS, date, and a one-line condition note per unit; submit the full set as one report. Done when: photo set of every fountain + posted notices + GPS + condition log

Where

Lamont Park, Segrue Rd & San Diego St, Lamont, CA 93241

Pay

$80 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

photo set of every fountain + posted notices + GPS + condition log

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-08-17

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 30–60 minutes. Method of record: EPA drinking-water sampling (3Ts / LCR first-draw where lead is in scope)

Bring

• GPS-capable phone
• test kit for each named analyte (nitrate/coliform/arsenic/lead as specified)
• clean sample bottle + label
• nitrile gloves
• camera

Steps

1. 1. Navigate to the sampling point; confirm GPS is inside the posting radius; record the waypoint.
2. 2. Photograph the tap or wellhead with a legible timestamp.
3. 3. If first-draw is required, sample after >=6h stagnation; if flushed, run the tap 2-3 minutes first, then sample.
4. 4. Fill the bottle without touching the inside; cap immediately.
5. 5. Run each test per kit instructions; wait the exact develop/incubation time; read and record every value with units.
6. 6. Record coliform as present/absent after the stated incubation window.
7. 7. Enter all readings, units, GPS, time, and photos into the proof record; sign it.

If it does not match the plan

• Nitrate > 10 mg/L -> tag 'exceeds EPA MCL'; advise no infant consumption pending certified-lab confirmation.
• Total coliform present -> advise disinfection + retest; recommend lab confirmation.
• Arsenic > 10 ppb or Lead > 15 ppb -> tag exceedance; recommend certified-lab confirmation before any consumption guidance.

What counts as done

• GPS waypoint recorded inside the posting radius
• Timestamped photo of the exact sampling point
• Each required analyte recorded with a numeric value + units (or present/absent)
• Sampling type (first-draw vs flushed) explicitly noted

Proof is measured against these, not judged by taste.