Anyone can start here · Vacant lot, Iowa Avenue block, east side, Flint, MI 48506
Clear and green a vacant lot on Flint's east side (2026-07-18)
Flint carries thousands of vacant lots left by the teardown years and population loss, and untended lots collect trash, tall weeds, and dumping that drag down the blocks around them. A cleared, mowed, cared-for lot changes how a whole street feels and keeps dumping from taking root. Standard: Genesee County Land Bank lot-maintenance practice + EPA community revitalization guidance; SDG 11 Sustainable Cities and Communities. Proof: Before/after lot photos plus bag count Method (Genesee County Land Bank lot-maintenance practice + EPA community revitalization guidance; SDG 11 Sustainable Cities and Communities.): 1. Pick a publicly accessible vacant lot showing litter and overgrowth and photograph its starting condition. 2. Collect and bag all loose litter, working with gloves and a grabber tool. 3. Cut back weeds and overgrowth to a tidy height with hand tools or a push mower. 4. Leave any needles, drums, or suspected hazardous items in place and photograph them for a report instead of touching them. 5. Stack bagged trash at the legal curb pickup point. 6. Photograph the finished lot from the same angles as the start with GPS and date on. Done when: Before/after lot photos plus bag count
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 60–180 minutes. Method of record: Vacant/blighted residential-parcel stewardship — condition survey, native low-mow meadow seeding, and community raised-bed conversion. USDA/SARE sustainable land-conversion practice + Xerces Society no-till native-seeding guidance; proceeds only with the parcel owner (private owner, or the city/county land bank) having invited or authorized the work at claim time.
Bring
- camera + tape measure
- trash grabber/rake + heavy-duty bags for debris
- hand tools: shovel, hard rake, hand tiller (no-till surface prep only)
- native low-mow seed mix appropriate to the region, or raised-bed lumber/soil for the build variant
- gloves + closed-toe boots + eye protection
- wheelbarrow
Steps
- 1. Confirm parcel ownership/authorization status (city/county land bank listing or private-owner invitation) and photograph the lot as found, noting dumped debris, standing water, and existing vegetation.
- 2. Clear loose trash and dumped debris to a safe hauling point; document anything too large or hazardous for hand removal rather than forcing it.
- 3. For the meadow variant: lightly rake the surface for seed-to-soil contact (no deep tillage) and broadcast the native low-mow mix at the labeled rate. For the raised-bed variant: site and build the bed frame level, back-fill with the planned soil mix, and confirm drainage.
- 4. Water in the seeding or the finished bed, and mark the treated area's boundary (flags or a low border) so it reads as tended, not abandoned.
- 5. Photograph the finished area from the same vantage as the before photo and log the treated square footage.
- 6. Enter the ownership/authorization reference, before/after photos, and the treatment log into the proof record; sign.
If it does not match the plan
- No ownership/authorization reference available (not on a land-bank list, no owner contact) -> STOP: document only, do not clear or plant; route to the city land-bank program for authorization.
- Debris includes anything suggesting hazardous dumping (drums, unlabeled chemical containers, sharps) -> STOP: do not handle; photograph from a safe distance and report to 311/code enforcement instead of clearing it yourself.
- Standing water present with mosquito larvae or a suspected illicit discharge source -> document and report to the MS4/311 line before proceeding with ground work.
What counts as done
- Parcel ownership/authorization reference recorded before any work begins
- Before and after photos from a matching vantage showing debris cleared and the meadow seeded or bed built
- Treated area boundary clearly marked so the lot reads as actively stewarded
- Treated square footage and materials (seed mix or bed lumber/soil) logged
Proof is measured against these, not judged by taste.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.