Stencil the storm drains that feed the Calumet waterways near Altgeld

The drains around Altgeld and Riverdale feed the Little Calumet River system, water that has absorbed a century of industrial dumping and is now the focus of long restoration work. Stenciled drains tell every passerby that what enters the curb reaches the river. Standard: EPA nonpoint-source outreach practice + Calumet Area of Concern context; SDG 14 Life Below Water. Proof: GPS-dated photo of every stenciled drain Method (EPA nonpoint-source outreach practice + Calumet Area of Concern context; SDG 14 Life Below Water.): 1. Map the storm drains along the assigned public blocks. 2. Sweep each drain lip clear by hand and broom. 3. Stencil each drain with the approved 'Drains to River — No Dumping' marking. 4. Log each drain's location. 5. Photograph every stenciled drain with GPS and date on. Done when: GPS-dated photo of every stenciled drain

Where

Curb storm drains, public blocks near 130th St and S Indiana Ave, Chicago, IL 60827

Pay

$80 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

GPS-dated photo of every stenciled drain

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-09-01

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 30–75 minutes. Method of record: EPA green-infrastructure inspection (bioretention / bioswale / permeable pavement function + maintenance)

Bring

• measuring tape
• GPS phone
• camera
• trowel / probe
• data sheet
• gloves

Steps

1. 1. Locate the GI asset; record GPS; identify the type (rain garden / bioswale / permeable pavement / tree filter).
2. 2. Photograph the asset, its inlet, and its outlet/overflow.
3. 3. Check the inlet and outlet for blockage (sediment, trash, mulch) and note whether flow can enter/leave freely.
4. 4. Check for standing water and estimate whether it drains within the design window (typically <24-48h after rain); probe media if dry.
5. 5. Assess vegetation/media condition and estimate sediment/trash accumulation depth.
6. 6. Note erosion, bypass, or structural damage and list the maintenance needed.
7. 7. Enter asset type, condition, inlet/outlet status, drainage observation, sediment level, maintenance needs, GPS, photos; sign.

If it does not match the plan

• Standing water persists > 48h after rain -> flag failed infiltration (clogged media) for rehab.
• Inlet or outlet blocked -> flag for cleaning; the asset isn't capturing runoff.
• Erosion, undercutting, or flow bypassing the asset -> flag for repair.
• Documentation only — no digging out media or altering structures.

What counts as done

• Asset type + overall condition recorded
• Inlet + outlet clear/blocked status recorded
• Standing-water / infiltration observation recorded
• Sediment/trash level + maintenance recommendations + GPS + photos

Proof is measured against these, not judged by taste.