Anyone can start here · Young trees route, Willard-Hay neighborhood, Minneapolis, MN 55411
Run the weekly watering round for young Northside trees (2026-07-18)
Minneapolis summers now swing hot and dry, and the young trees replanted after the tornado and ash removals die of thirst before they ever shade anyone. A weekly deep-watering round through Jordan and Willard-Hay is what turns replanting into canopy. Standard: ISA young-tree establishment guidance; SDG 13 Climate Action. Proof: Route list plus dated photos of watered trees Method (ISA young-tree establishment guidance; SDG 13 Climate Action.): 1. Map a walking route of recently planted young trees on boulevards and invited yards. 2. Deep-water each tree with roughly 15 to 20 gallons at the root zone. 3. Top up mulch rings and pull mulch off trunks. 4. Flag stressed or damaged trees for the care round. 5. Photograph each watered tree with GPS and date on and keep the route list. Done when: Route list plus dated photos of watered trees
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 45–90 minutes. Method of record: ANSI A300 Part 6 (Planting) + ISA Best Management Practices for tree planting & establishment; Arbor Day Foundation planting standard. DIY-safe volunteer planting on cleared, utility-marked ground; no mechanized or utility-conflict digging.
Bring
- GPS-capable phone
- camera
- round-point shovel + digging fork
- hand pruners
- mulch (wood chips) + measuring stick
- watering can or hose
- gloves + closed-toe boots
Steps
- 1. Confirm the planting spot is inside the posting radius and clear of marked utilities (811 locate honored); record the GPS waypoint.
- 2. Photograph the bare site and the nursery stock (label/species visible) before planting.
- 3. Dig the hole 2-3x the root-ball width and no deeper than the root ball, so the root flare will sit at or just above grade.
- 4. Remove the container or cut away burlap/wire, gently loosen circling roots, and set the tree with the root flare visible at grade.
- 5. Backfill with the native soil in layers, firming out air pockets; do not bury the root flare or amend heavily.
- 6. Build a shallow watering basin, water in slowly until the backfill is saturated, and apply 2-3 inches of mulch kept 3 inches off the trunk.
- 7. Stake only if the tree cannot stand on its own; use two loose ties that allow trunk movement, and note a removal date within one year.
- 8. Record species, GPS, before/after photos, root-flare-at-grade confirmation, mulch depth, and water applied into the proof record; sign.
If it does not match the plan
- Unmarked or suspected buried utility, or the 811 locate is not honored -> STOP: do not dig; reschedule after a confirmed locate.
- Root ball is dry, circling/kinked, or the trunk is wounded -> do not plant as-is; soak/correct or reject the stock and note it, rather than establish a failing tree.
- Right-of-way, overhead-line conflict, or a species/site mismatch -> flag for the site steward and choose an approved spot/species; never plant into a conflict.
What counts as done
- GPS waypoint recorded inside the posting radius on utility-cleared ground
- Before and after photos showing the root flare visible at grade
- Mulch applied 2-3 inches deep and held off the trunk, with a watering basin formed and watered in
- Species and any staking (with a removal date) recorded in the proof
Proof is measured against these, not judged by taste.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.