Build a new raised growing bed at an invited Camden community garden

Camden is a USDA-recognized food desert, and its community gardens have waiting lists for growing space while soil concerns keep people from planting in the ground. Every new raised bed with clean fill is direct, usable food capacity for a family this same season. Standard: USDA People's Garden / community food production guidance; SDG 2 (Zero Hunger). Proof: Photos of frame assembly, filled bed, and finished level bed with dimensions Method (USDA People's Garden / community food production guidance; SDG 2 (Zero Hunger).): 1. Confirm the garden host invitation and the assigned bed footprint. 2. Assemble the bed frame from untreated lumber and square and level it in place. 3. Line the base with cardboard and fill with the garden's clean soil-and-compost mix. 4. Rake the surface level and edge the surrounding path. 5. Photograph the finished bed with GPS and date and log its dimensions. Done when: Photos of frame assembly, filled bed, and finished level bed with dimensions

Where

Host-invited community gardens, Bergen Square area, Camden, NJ 08103

Pay

$80 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Photos of frame assembly, filled bed, and finished level bed with dimensions

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-09-01

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 60–120 minutes. Method of record: USDA/SARE sustainable vegetable production + Cooperative Extension Master Gardener practices; People's Garden bed establishment. Hand-tool, DIY-safe food growing on tested/known-clean soil or raised beds.

Bring

• GPS-capable phone
• camera
• garden fork/broadfork + hand trowel
• finished compost + rake
• seeds or transplants (labeled)
• mulch (straw/leaf)
• watering can or hose

Steps

1. 1. Confirm the bed location inside the posting radius; record the GPS waypoint and photograph the bed before work.
2. 2. Clear weeds and debris; loosen the top 8-12 inches with a fork/broadfork without inverting the soil profile.
3. 3. Spread 1-2 inches of finished compost and rake the bed level.
4. 4. Sow seeds to the depth/spacing on the packet, or set transplants at their correct depth, in labeled rows.
5. 5. Water in gently to settle the soil around seeds/roots.
6. 6. Apply a light straw/leaf mulch between rows to hold moisture, keeping it off seedling stems.
7. 7. Record the crop plan, spacing, and a watering/harvest cadence for the next visit.
8. 8. Enter crop list, GPS, before/after photos, and the care cadence into the proof record; sign.

If it does not match the plan

• Soil is untested near a pre-1978 structure, old orchard, or roadway (possible lead/contaminant) -> do not plant edibles in-ground; use a raised bed with clean imported soil and flag for a soil test.
• Out-of-season crop or a hard frost in the forecast -> adjust the crop choice or protect with cover; do not sow into a predictable loss.
• Signs of active pest/disease on transplants -> reject the affected stock and note it; never introduce a known infestation to the bed.

What counts as done

• GPS waypoint recorded inside the posting radius
• Before and after photos of the planted bed
• Crops sown/transplanted at packet-correct depth and spacing, in labeled rows
• Bed watered in and mulched, with a watering/harvest cadence recorded

Proof is measured against these, not judged by taste.