Log the bay-edge high-water line at Baseco Compound's seawall path (2026-07-18)

Baseco Compound sits on reclaimed land at the mouth of the Pasig River on Manila Bay, and its seawall path floods on king tides and typhoon surges well before official warnings reach residents. A dry-path visual log gives the community and disaster office a real record of how far the water actually reaches. Standard: UN-Habitat urban flood-risk monitoring guidance; SDG 11.5 (reduce disaster impacts). Proof: Timestamped waterline photo + log Method (UN-Habitat urban flood-risk monitoring guidance; SDG 11.5 (reduce disaster impacts).): 1. Stand on the dry seawall public path at the marked observation point. 2. Photograph the waterline against the fixed reference mark. 3. Record date, time, and tide or surge condition. 4. Note any visible seawall damage or blockage from the public vantage point. 5. Submit the photo and log entry. Done when: Timestamped waterline photo + log

Where

Seawall public path, Baseco Compound, Tondo, Manila, Philippines

Pay

$80 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Timestamped waterline photo + log

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-07-25

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 45–90 minutes. Method of record: FEMA floodplain + green-infrastructure siting screen

Bring

• GPS phone
• tape/ruler for deposition depth
• metals field kit (if sediment screen in scope)
• boots + gloves
• camera

Steps

1. 1. Confirm post-event conditions are safe; navigate to the site; record GPS.
2. 2. Photograph deposited sediment / affected area.
3. 3. Measure deposition depth at representative points.
4. 4. If a sediment contaminant screen is in scope, run the metals field kit and record values.
5. 5. Note debris, hazards, and the extent (sketch).
6. 6. Enter depth, any analytes, hazard notes, GPS, photos into the proof record; sign.

If it does not match the plan

• Unstable ground / submerged debris / contaminated water -> document from safe footing; do not enter.
• Elevated metals in deposited sediment -> flag before any reuse; recommend lab confirm.

What counts as done

• Deposition depth recorded at representative points
• Metals screen recorded (if in scope)
• Debris/hazard note + extent sketch
• GPS waypoint + timestamped photos

Proof is measured against these, not judged by taste.