intermediate work · Host-invited community site near Rockwood Ave, Calexico, CA 92231
Put up a shade sail over a bare waiting area at an invited Calexico site
Calexico is one of the hottest cities in California, and its people wait outside constantly — for rides, for the crossing, for school pickup — on bare concrete that stays dangerous past sunset. A properly anchored shade sail over an invited waiting area converts lethal exposure into usable space for the entire eight-month heat season. Shade here is not amenity; it is infrastructure. Standard: Cal/OSHA heat illness prevention (shade provision) + manufacturer anchoring specs; SDG 3 Good Health, SDG 11 Sustainable Cities. Proof: Photos of anchored tensioned sail and shade cast with GPS/date Method (Cal/OSHA heat illness prevention (shade provision) + manufacturer anchoring specs; SDG 3 Good Health, SDG 11 Sustainable Cities.): 1. Confirm the host site, sail size, and anchor plan, with 811 marking for ground posts. 2. Set posts or confirm structural anchors at specified heights and angles. 3. Mount hardware and tension the sail per manufacturer spec. 4. Verify clearance, tension, and hardware tightness. 5. Photograph the finished shaded area and record the install with GPS and date. Done when: Photos of anchored tensioned sail and shade cast with GPS/date
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 45–90 minutes. Method of record: OSHA Heat-Related Hazards NEP (2022) + NIOSH Criteria heat-illness-prevention program audit (water/rest/shade, acclimatization, heat-index triggers)
Bring
- site PPE + sun protection + water
- tablet/clipboard with the OSHA Heat NEP checklist
- camera
- thermometer / heat-index reference (or weather-service heat index)
- note on the written heat-illness prevention plan
Steps
- 1. Check in with the competent person; confirm a written heat-illness prevention plan exists and identify who is new or returning (acclimatization risk). Observe-and-document only.
- 2. Record the day's heat index (temperature + humidity) and note which OSHA trigger tier applies (caution ~80°F / high ~91°F / extreme).
- 3. Check water: cool, potable, accessible, and enough for ~1 quart per worker per hour; photograph the stations and note their distance from the work.
- 4. Check shade + rest: a shaded rest area is available and the rest schedule scales with the heat-index tier (more/longer breaks as it climbs).
- 5. Check acclimatization: is there a graded schedule for new workers (first week) and returning workers (after a week or more away) — the highest-risk group?
- 6. Check recognition + emergency: are supervisors/workers trained to spot heat illness, is there a buddy/monitoring system, and a written emergency response (call 911, cool, don't leave alone)?
- 7. Tier each finding against the heat-index tier (stop-work / correct-before-proceed / monitor); enter photos, GPS, heat index, checklist, plan status, and findings; sign. Route stop-work items to the competent person.
If it does not match the plan
- At a high/extreme heat-index tier with no cool water OR no shaded rest available -> STOP-WORK: document, route to the competent person to establish water/shade/rest before work continues; do not proceed past the exposure.
- New or returning worker with no acclimatization schedule during a heat alert -> flag as the highest-risk gap; route to the competent person.
- Any worker showing heat-illness signs (confusion, fainting, hot/dry or profusely sweating skin, cramps) -> MEDICAL EMERGENCY: stop work, cool the worker, call 911. The agent documents and escalates, never diagnoses or treats.
- No written heat-illness prevention plan -> flag as a program gap; route to the competent person / employer. Approval and correction stay human.
What counts as done
- Day's heat index recorded with the applicable OSHA trigger tier
- Water, shade + rest-schedule, and acclimatization-plan status each documented (photos where visible)
- Heat-illness recognition and written emergency-response status recorded
- Every finding tiered with the responsible competent person named
Proof is measured against these, not judged by taste.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.