Build a wheelchair ramp for an invited Vado colonia elder

Colonia elders in wheelchairs can be trapped in their own homes by three concrete steps — county services have long waits and contractors don't come out for small jobs at colonia prices. A modular ramp built to slope standards at an invited home returns someone's front door to them in a weekend. Standard: ADA residential ramp slope practice (1:12); SDG 10 Reduced Inequalities. Proof: Finished-ramp photos + slope and rail check Method (ADA residential ramp slope practice (1:12); SDG 10 Reduced Inequalities.): 1. Measure the door threshold height and plan the ramp run at 1:12 slope with the household. 2. Build or assemble modular ramp sections with treated lumber or an aluminum kit on solid footings. 3. Install continuous handrails at standard height and a level landing at the door. 4. Fasten a non-slip surface and check every joint solid. 5. Photograph the finished ramp in use with date and GPS. Done when: Finished-ramp photos + slope and rail check

Where

Invited home, Vado colonia, Vado, NM 88072

Pay

$440 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Finished-ramp photos + slope and rail check

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-09-03

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 75–150 minutes. Method of record: Aging-in-place retrofit survey (NAHB CAPS practice + CDC STEADI home fall-hazard checklist + ICC/ANSI A117.1 dimensional references; LBC Equity petal; observation/planning only)

Bring

• camera
• tape measure (doorway/hall widths, threshold heights, counter/bed/toilet heights, stair rise)
• lux meter or light-meter app (task + path lighting)
• tablet/clipboard with the STEADI-based room-by-room checklist
• notepad for the occupant's own routine map (their words)

Steps

1. 1. Walk the occupant's actual day with them: wake, bathroom, kitchen, mail, laundry, favorite chair, bed. Record where they hesitate, grab, or avoid — the retrofit plan serves this routine, not a generic checklist. Their claim is simple: to stay in this home, safely.
2. 2. Run the fall-hazard walkthrough (CDC STEADI home checklist): loose rugs and cords, stair condition + handrails both sides, tub/shower entry, toilet height, night path from bed to bathroom; photograph each hazard.
3. 3. Measure the home against ICC/ANSI A117.1 references: doorway and hall clear widths, threshold heights, one-zero-step entry feasibility, bathroom clearances and reinforcement-ready walls for grab bars, kitchen reach zones; measure the light level on night paths and task areas.
4. 4. Assess first-floor-living feasibility honestly: could a bedroom + full bath + laundry work on the entry level, and what would each move require (and which require a licensed contractor or structural review)?
5. 5. Build the prioritized retrofit plan: immediate zero-construction wins (rug/cord/lighting/night-light changes), quick installs (grab bars into solid blocking, handrails, lever handles, threshold ramps), and contractor-scale items (bath reconfiguration, ramp with proper slope ~1:12, door widening) — each cost-banded, with funding paths (OAA/USDA-504/state) the household may qualify for.
6. 6. Review the plan with the occupant and any family/caregiver they choose; enter photos, GPS/address, measurements, the routine map, and the ranked plan; sign. Real (their day, measured), Proven (photo+GPS+signature), One-of-one (this person, this home). Route care/equipment questions to their clinician/OT and structural/electrical work to licensed contractors.

If it does not match the plan

• Any structural change (ramp, door widening, bath reconfiguration, stair modification) -> plan-and-route only; a licensed contractor scopes and performs it — the survey never installs.
• Occupant reports recent falls, dizziness, or declining mobility -> advise routing to their clinician / an occupational therapist for a care-level assessment; the survey plans the home, never the person's health.
• Grab-bar locations without solid blocking/reinforcement visible -> mark as install-into-blocking-only by a qualified installer; a grab bar into drywall is a hazard, not a fix.
• Electrical work beyond plug-in lighting (switch relocation, added circuits, stair lighting) -> licensed electrician only.
• Evidence the occupant may be unsafe at home tonight (no rail on a used stair, non-functional bathroom) -> flag URGENT to the household/caregiver the same day, with the interim zero-construction mitigation named.

What counts as done

• Occupant's daily-routine map recorded in their own words with hesitation/avoidance points marked
• STEADI-based fall-hazard walkthrough completed with photo evidence per hazard
• Accessibility measurements recorded against ICC/ANSI A117.1 references (widths, thresholds, clearances, heights, night-path light levels)
• Prioritized retrofit plan delivered in three tiers (zero-construction / quick-install / contractor-scale), cost-banded, with funding paths and licensed-pro routing on structural/electrical items

Proof is measured against these, not judged by taste.