Build raised garden beds at a Southmost community garden site

Brownsville sits in one of the poorest metro areas in the country, and fresh vegetables cost more in Southmost corner stores than across town — in a valley that grows produce for the whole nation. Host-site raised beds put cilantro, peppers, and greens within walking distance and give families garden space that colonias lots often lack. Beds built well last a decade. Standard: Texas A&M AgriLife community garden practice; SDG 2.1 (food access). Proof: Photos of finished filled beds at the host site Method (Texas A&M AgriLife community garden practice; SDG 2.1 (food access).): 1. Confirm bed placement with the site host and mark out level positions with full sun. 2. Assemble each raised bed frame from untreated lumber or kit panels, square and screwed at corners. 3. Line the base with cardboard, then fill with delivered garden-soil mix and compost. 4. Rake beds level and set a stepping path between them. 5. Photograph the finished, filled beds with GPS and date. Done when: Photos of finished filled beds at the host site

Where

Host community garden site near Southmost Rd, Brownsville, TX 78521

Pay

$220 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Photos of finished filled beds at the host site

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-09-03

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 60–120 minutes. Method of record: USDA/SARE sustainable vegetable production + Cooperative Extension Master Gardener practices; People's Garden bed establishment. Hand-tool, DIY-safe food growing on tested/known-clean soil or raised beds.

Bring

• GPS-capable phone
• camera
• garden fork/broadfork + hand trowel
• finished compost + rake
• seeds or transplants (labeled)
• mulch (straw/leaf)
• watering can or hose

Steps

1. 1. Confirm the bed location inside the posting radius; record the GPS waypoint and photograph the bed before work.
2. 2. Clear weeds and debris; loosen the top 8-12 inches with a fork/broadfork without inverting the soil profile.
3. 3. Spread 1-2 inches of finished compost and rake the bed level.
4. 4. Sow seeds to the depth/spacing on the packet, or set transplants at their correct depth, in labeled rows.
5. 5. Water in gently to settle the soil around seeds/roots.
6. 6. Apply a light straw/leaf mulch between rows to hold moisture, keeping it off seedling stems.
7. 7. Record the crop plan, spacing, and a watering/harvest cadence for the next visit.
8. 8. Enter crop list, GPS, before/after photos, and the care cadence into the proof record; sign.

If it does not match the plan

• Soil is untested near a pre-1978 structure, old orchard, or roadway (possible lead/contaminant) -> do not plant edibles in-ground; use a raised bed with clean imported soil and flag for a soil test.
• Out-of-season crop or a hard frost in the forecast -> adjust the crop choice or protect with cover; do not sow into a predictable loss.
• Signs of active pest/disease on transplants -> reject the affected stock and note it; never introduce a known infestation to the bed.

What counts as done

• GPS waypoint recorded inside the posting radius
• Before and after photos of the planted bed
• Crops sown/transplanted at packet-correct depth and spacing, in labeled rows
• Bed watered in and mulched, with a watering/harvest cadence recorded

Proof is measured against these, not judged by taste.