Build a new planting bed at a host-invited Willowbrook community garden site

Willowbrook sits in a stretch of south county with few full-service grocery stores, and the community garden plots that exist have waiting lists. One more framed, filled bed at a host-invited garden site means one more family growing vegetables within walking distance of home. Standard: UC Cooperative Extension community garden bed-building guidance; SDG 2 (Zero Hunger). Proof: Finished-bed photos plus host confirmation Method (UC Cooperative Extension community garden bed-building guidance; SDG 2 (Zero Hunger).): 1. Confirm the bed footprint with the garden host and clear surface weeds from the spot. 2. Assemble a raised frame from untreated lumber, squared and leveled. 3. Line the base with cardboard and fill with purchased garden-blend soil and compost. 4. Rake the surface level and water it once to settle. 5. Photograph the finished bed from two angles with the host's sign-off note, date, and GPS. Done when: Finished-bed photos plus host confirmation

Where

Host-invited community garden site near El Segundo Blvd, Willowbrook, CA 90061

Pay

$220 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Finished-bed photos plus host confirmation

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-09-03

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 60–120 minutes. Method of record: USDA/SARE sustainable vegetable production + Cooperative Extension Master Gardener practices; People's Garden bed establishment. Hand-tool, DIY-safe food growing on tested/known-clean soil or raised beds.

Bring

• GPS-capable phone
• camera
• garden fork/broadfork + hand trowel
• finished compost + rake
• seeds or transplants (labeled)
• mulch (straw/leaf)
• watering can or hose

Steps

1. 1. Confirm the bed location inside the posting radius; record the GPS waypoint and photograph the bed before work.
2. 2. Clear weeds and debris; loosen the top 8-12 inches with a fork/broadfork without inverting the soil profile.
3. 3. Spread 1-2 inches of finished compost and rake the bed level.
4. 4. Sow seeds to the depth/spacing on the packet, or set transplants at their correct depth, in labeled rows.
5. 5. Water in gently to settle the soil around seeds/roots.
6. 6. Apply a light straw/leaf mulch between rows to hold moisture, keeping it off seedling stems.
7. 7. Record the crop plan, spacing, and a watering/harvest cadence for the next visit.
8. 8. Enter crop list, GPS, before/after photos, and the care cadence into the proof record; sign.

If it does not match the plan

• Soil is untested near a pre-1978 structure, old orchard, or roadway (possible lead/contaminant) -> do not plant edibles in-ground; use a raised bed with clean imported soil and flag for a soil test.
• Out-of-season crop or a hard frost in the forecast -> adjust the crop choice or protect with cover; do not sow into a predictable loss.
• Signs of active pest/disease on transplants -> reject the affected stock and note it; never introduce a known infestation to the bed.

What counts as done

• GPS waypoint recorded inside the posting radius
• Before and after photos of the planted bed
• Crops sown/transplanted at packet-correct depth and spacing, in labeled rows
• Bed watered in and mulched, with a watering/harvest cadence recorded

Proof is measured against these, not judged by taste.