Install a shade sail over a host-approved play area in park-poor Cudahy

Cudahy has among the least park space per child in California, and the few play areas it has bake in full sun through months of 90-degree days. A properly anchored shade sail over a host-approved play area drops surface temperatures dramatically and keeps slides and climbers usable through summer afternoons. Standard: CPSC public playground safety guidance on sun and surface heat; SDG 11 (Sustainable Cities and Communities). Proof: Anchor and tensioned-sail photos plus midday shade photo Method (CPSC public playground safety guidance on sun and surface heat; SDG 11 (Sustainable Cities and Communities).): 1. Confirm the sail footprint, anchor points, and written approval with the site host. 2. Install the mounting hardware on the approved posts or structure at or below the six-foot working limit, or bolt to host-provided anchor posts. 3. Tension the sail per the manufacturer's pattern so no edge flaps or sags. 4. Check clearances above play equipment and walking paths. 5. Photograph the anchors, the tensioned sail from two angles, and a noon shade photo with date and GPS. Done when: Anchor and tensioned-sail photos plus midday shade photo

Where

Host-approved play area near Cudahy City Hall area, Cudahy, CA 90201

Pay

$380 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Anchor and tensioned-sail photos plus midday shade photo

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-09-03

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 30–60 minutes. Method of record: Community-coordination hazard survey (documentation + coordination only; severity-tagged)

Bring

• GPS phone
• camera
• hi-vis vest
• severity-tag reference (minor|moderate|severe|critical)

Steps

1. 1. Walk the corridor from a safe path; record a GPS waypoint at each hazard.
2. 2. Photograph each hazard.
3. 3. Classify the hazard type and assign a severity tag (minor|moderate|severe|critical).
4. 4. Name the responsible handoff target (BID / city agency / utility).
5. 5. Enter each hazard's type, severity, GPS, photo, and handoff target into the proof record; sign.

If it does not match the plan

• NEVER perform repair or enter the roadway/public right-of-way -> documentation and coordination only.
• Any severity:critical (e.g., live downed wire, open utility vault) -> flag immediately to the responsible agency; keep clear.

What counts as done

• Each hazard photographed with a GPS waypoint
• Severity tag assigned per hazard
• Hazard type classified
• Named handoff target per hazard

Proof is measured against these, not judged by taste.