intermediate work · Host-invited community garden site near Quesada Avenue and 3rd Street, San Francisco, CA 94124
Build lined raised beds with clean soil at an invited Bayview community garden
In Bayview, raised beds are not garden decor — they are the safe way to grow food where legacy industrial soils make direct ground planting unwise. Invited gardens here grow in imported clean media above a barrier by design, and they always need more beds built than volunteer hands can supply. Each lined bed is safe food production, by construction. Standard: UC ANR safe urban gardening guidance for legacy-industrial soils (lined raised beds, clean imported media); SDG 2 (Zero Hunger). Proof: Liner and build-sequence photos plus host confirmation Method (UC ANR safe urban gardening guidance for legacy-industrial soils (lined raised beds, clean imported media); SDG 2 (Zero Hunger).): 1. Confirm placement and the host's liner specification before building. 2. Build the untreated-lumber frame, squared and screwed at corners. 3. Lay the host-specified barrier liner across the base before any fill. 4. Fill with clean imported soil-compost mix, rake flat, and label the bed. 5. Photograph the liner going in, the finished bed, and the host confirmation. Done when: Liner and build-sequence photos plus host confirmation
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 60–120 minutes. Method of record: USDA/SARE sustainable vegetable production + Cooperative Extension Master Gardener practices; People's Garden bed establishment. Hand-tool, DIY-safe food growing on tested/known-clean soil or raised beds.
Bring
- GPS-capable phone
- camera
- garden fork/broadfork + hand trowel
- finished compost + rake
- seeds or transplants (labeled)
- mulch (straw/leaf)
- watering can or hose
Steps
- 1. Confirm the bed location inside the posting radius; record the GPS waypoint and photograph the bed before work.
- 2. Clear weeds and debris; loosen the top 8-12 inches with a fork/broadfork without inverting the soil profile.
- 3. Spread 1-2 inches of finished compost and rake the bed level.
- 4. Sow seeds to the depth/spacing on the packet, or set transplants at their correct depth, in labeled rows.
- 5. Water in gently to settle the soil around seeds/roots.
- 6. Apply a light straw/leaf mulch between rows to hold moisture, keeping it off seedling stems.
- 7. Record the crop plan, spacing, and a watering/harvest cadence for the next visit.
- 8. Enter crop list, GPS, before/after photos, and the care cadence into the proof record; sign.
If it does not match the plan
- Soil is untested near a pre-1978 structure, old orchard, or roadway (possible lead/contaminant) -> do not plant edibles in-ground; use a raised bed with clean imported soil and flag for a soil test.
- Out-of-season crop or a hard frost in the forecast -> adjust the crop choice or protect with cover; do not sow into a predictable loss.
- Signs of active pest/disease on transplants -> reject the affected stock and note it; never introduce a known infestation to the bed.
What counts as done
- GPS waypoint recorded inside the posting radius
- Before and after photos of the planted bed
- Crops sown/transplanted at packet-correct depth and spacing, in labeled rows
- Bed watered in and mulched, with a watering/harvest cadence recorded
Proof is measured against these, not judged by taste.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.