Clear litter from the Escondido Creek channel banks along the public trail (2026-07-20)

Escondido Creek runs a concrete channel through the city's core, collecting shopping carts' worth of litter that the first storm flushes toward San Elijo Lagoon. Monthly grabber-and-bag sweeps from the paved public trail — never entering the channel — intercept that load where it's still easy to take. Standard: California Water Boards trash policy for urban channels — SDG 6. Proof: Before/after photos with weighed haul Method (California Water Boards trash policy for urban channels — SDG 6.): 1. Work the paved trail edge with grabbers and bags, staying out of the channel itself. 2. Collect litter within safe arm's reach of the trail and bank top only. 3. Sort recyclables and weigh the haul. 4. Photograph cleared stretches before and after with GPS and date. Done when: Before/after photos with weighed haul

Where

Escondido Creek Trail, near Harding St crossing, Escondido, CA 92025

Pay

$300 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Before/after photos with weighed haul

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-08-19

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 90–180 minutes. Method of record: Urban-creek riparian restoration install (native buffer planting, bank stabilization, invasive/litter removal) per NRCS CPS 391 riparian forest buffer + EPA nonpoint-source BMP practice -- hands-on restoration, not a bioassessment survey; assess->clear->plant/stabilize->verify

Bring

• shovel / dibble bar
• native bare-root or plug plantings (locally sourced)
• erosion-control matting or willow stakes (bank-stabilization sites)
• loppers / hand saw (invasive removal)
• gloves + trash bags (litter pass)
• camera
• GPS-enabled phone

Steps

1. 1. Walk the reach with the site plan (or the standing bioassessment/watershed-health finding, if one exists) and photograph the bank/buffer segment as found: bare soil, invasive cover, litter, erosion.
2. 2. Clear invasive growth and litter from the planting zone by hand, bagging trash separately from green waste; leave native volunteers in place.
3. 3. Plant native riparian species (or set willow stakes / erosion-control matting) at the spacing and depth the site plan calls for, working from the top of bank downward; water each planting in.
4. 4. Stake or anchor any erosion-control matting so it will not lift in the next high-flow event, and mulch around new plantings kept clear of stems.
5. 5. Photograph the finished segment from the matching vantage, record species/count or matting area installed, and note any follow-up watering the planting needs.

If it does not match the plan

• Steep, actively eroding or undercut bank -> stabilize with matting/stakes before planting; never plant into a bank that is still actively failing.
• Standing or fast-moving water in the work zone -> stay on the bank, never enter the channel; document from the bank and reschedule if the reach is unsafe.
• Suspected illicit discharge, sheen, or odor in the reach -> stop, photograph from a safe distance, do not touch, and report to the MS4/311 line rather than working through it.

What counts as done

• Before photo of the reach segment (bare soil, invasive cover, litter, or erosion as found)
• Invasive/litter removal photo-documented, green waste separated from trash
• Planting or matting installed to spec (species/count or matting area recorded) with after photo from matching vantage
• Erosion-control matting/stakes secured against the next high-flow event, and follow-up watering need noted

Proof is measured against these, not judged by taste.