Mount reflective address signs on rebuilt and surviving Weed homes

When the Mill Fire moved through Lincoln Heights, responders lost time finding addresses on streets where landmarks and house numbers had burned away. Reflective address signs mounted at every invited driveway make each home findable in smoke, dark, and the next emergency — a small fix that matters most in the towns that have already burned. Standard: NFPA premises identification practice + county addressing standards; SDG 11 Sustainable Cities and Communities. Proof: Before/after photos from the street per home Method (NFPA premises identification practice + county addressing standards; SDG 11 Sustainable Cities and Communities.): 1. Confirm each resident's invitation and the correct address number. 2. Photograph the driveway entrance as found. 3. Mount the reflective sign on the post, fence, or wall at the height and orientation visible from both travel directions. 4. Check visibility from the street in both directions. 5. Photograph the mounted sign from the street and log the address. Done when: Before/after photos from the street per home

Where

Invited homes, Lincoln Heights streets, Weed, CA 96094

Pay

$140 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Before/after photos from the street per home

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-09-03

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 30–60 minutes. Method of record: Community-coordination hazard survey (documentation + coordination only; severity-tagged)

Bring

• GPS phone
• camera
• hi-vis vest
• severity-tag reference (minor|moderate|severe|critical)

Steps

1. 1. Walk the corridor from a safe path; record a GPS waypoint at each hazard.
2. 2. Photograph each hazard.
3. 3. Classify the hazard type and assign a severity tag (minor|moderate|severe|critical).
4. 4. Name the responsible handoff target (BID / city agency / utility).
5. 5. Enter each hazard's type, severity, GPS, photo, and handoff target into the proof record; sign.

If it does not match the plan

• NEVER perform repair or enter the roadway/public right-of-way -> documentation and coordination only.
• Any severity:critical (e.g., live downed wire, open utility vault) -> flag immediately to the responsible agency; keep clear.

What counts as done

• Each hazard photographed with a GPS waypoint
• Severity tag assigned per hazard
• Hazard type classified
• Named handoff target per hazard

Proof is measured against these, not judged by taste.