Clear post-flood debris from an invited Korail Basti home lane once fully dry

Korail floods repeatedly through the monsoon, leaving debris and silt in home lanes long after the water recedes. Clearing that debris once the host confirms the area is fully dry restores safe passage and reduces standing mess that draws pests. Standard: UN-Habitat/UNDRR flood-resilience guidance + SDG 11.5 / SDG 13.1. Proof: Before/after photo of the cleared, dry lane Method (UN-Habitat/UNDRR flood-resilience guidance + SDG 11.5 / SDG 13.1.): 1. Confirm with the host that the area has fully dried and no standing water remains. 2. Photograph the debris condition before starting. 3. Clear silt, debris, and damaged household items by hand into collection bags. 4. Sweep the lane surface clear of remaining loose material. 5. Photograph the cleared lane with GPS and date as proof. Done when: Before/after photo of the cleared, dry lane

Where

Host-invited home lane, Korail Basti, Dhaka 1212

Pay

$160 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Before/after photo of the cleared, dry lane

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-09-03

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 45–90 minutes. Method of record: FEMA floodplain + green-infrastructure siting screen

Bring

• GPS phone
• tape/ruler for deposition depth
• metals field kit (if sediment screen in scope)
• boots + gloves
• camera

Steps

1. 1. Confirm post-event conditions are safe; navigate to the site; record GPS.
2. 2. Photograph deposited sediment / affected area.
3. 3. Measure deposition depth at representative points.
4. 4. If a sediment contaminant screen is in scope, run the metals field kit and record values.
5. 5. Note debris, hazards, and the extent (sketch).
6. 6. Enter depth, any analytes, hazard notes, GPS, photos into the proof record; sign.

If it does not match the plan

• Unstable ground / submerged debris / contaminated water -> document from safe footing; do not enter.
• Elevated metals in deposited sediment -> flag before any reuse; recommend lab confirm.

What counts as done

• Deposition depth recorded at representative points
• Metals screen recorded (if in scope)
• Debris/hazard note + extent sketch
• GPS waypoint + timestamped photos

Proof is measured against these, not judged by taste.