Repair a cracked window pane at an invited Beirut home

Older window frames in Beirut's rebuilding neighborhoods often carry a cracked or loose pane that lets in drafts and rattles in the wind — reglazing one pane at a time is a small, real fix a resident can invite directly. Standard: UN-Habitat housing-maintenance guidance — SDG 11 (Sustainable Cities and Communities). Proof: Before/after photos of the pane. Method (UN-Habitat housing-maintenance guidance — SDG 11 (Sustainable Cities and Communities).): 1. Confirm with the occupant which pane needs repair. 2. Remove any loose or cracked glazing putty by hand. 3. Set the pane (or a new pane the host provides) with fresh glazing putty. 4. Smooth the putty line and let it set per product instructions. 5. Photograph the repaired pane. Done when: Before/after photos of the pane.

Where

Invited home, Beirut, Lebanon

Pay

$220 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Before/after photos of the pane.

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-09-03

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 45–90 minutes. Method of record: Re-glazing a cracked or broken window pane and re-puttying its sash on an older rowhouse window, from the interior/ground level

Bring

• glazier's points + glazing putty/compound
• putty knife + heat gun or scraper (old putty removal)
• replacement glass pane cut to size + gloves + safety glasses
• camera

Steps

1. 1. ASSESS: photograph the cracked/broken pane and measure the sash opening; confirm the work is reachable from inside or ground level (no exterior ladder work).
2. 2. Remove the old, failed putty and any broken glass safely (gloves + safety glasses), and clean the sash rabbet.
3. 3. Set the new pane on a thin bed of putty, secure with glazier's points, and apply and tool the finish putty bead to a clean, weathertight line.
4. 4. Let the putty skin over per the product's cure time, then photograph the finished, weathertight pane from the same before vantage.

If it does not match the plan

• Sash wood itself is rotted or the frame won't hold points/putty -> STOP; name the window-replacement job instead.
• Any exterior access above ground level required -> STOP; route to a job authored with proper fall-protection framing.

What counts as done

• Old broken glass and failed putty fully removed and safely disposed
• New pane set, pointed and puttied to a clean, weathertight bead
• Before/after photos from a matching vantage
• Work done from interior/ground level only

Proof is measured against these, not judged by taste.