Build a rain garden along Reynolds Avenue

Street runoff on Reynolds Avenue in Chicora-Cherokee has nowhere to go before it reaches the already overloaded storm system, and a rain garden gives it somewhere to soak in first. Standard: EPA Green Infrastructure Program, distributed stormwater capture Proof: Before/after photos of the rain garden and runoff path. Method (EPA Green Infrastructure Program, distributed stormwater capture): 1. Mark out the rain garden footprint at Reynolds Avenue, Chicora-Cherokee, North Charleston, SC where runoff already collects. 2. Dig a shallow basin and set the soil aside for backfill. 3. Mix compost into the basin soil to improve infiltration. 4. Plant water-tolerant native plants in the basin and mulch around them. 5. Direct the downspout or runoff path into the basin and photograph the finished garden. Done when: Before/after photos of the rain garden and runoff path.

Where

Reynolds Avenue, Chicora-Cherokee, North Charleston, SC

Pay

$400 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Before/after photos of the rain garden and runoff path.

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-09-03

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 30–75 minutes. Method of record: EPA green-infrastructure inspection (bioretention / bioswale / permeable pavement function + maintenance)

Bring

• measuring tape
• GPS phone
• camera
• trowel / probe
• data sheet
• gloves

Steps

1. 1. Locate the GI asset; record GPS; identify the type (rain garden / bioswale / permeable pavement / tree filter).
2. 2. Photograph the asset, its inlet, and its outlet/overflow.
3. 3. Check the inlet and outlet for blockage (sediment, trash, mulch) and note whether flow can enter/leave freely.
4. 4. Check for standing water and estimate whether it drains within the design window (typically <24-48h after rain); probe media if dry.
5. 5. Assess vegetation/media condition and estimate sediment/trash accumulation depth.
6. 6. Note erosion, bypass, or structural damage and list the maintenance needed.
7. 7. Enter asset type, condition, inlet/outlet status, drainage observation, sediment level, maintenance needs, GPS, photos; sign.

If it does not match the plan

• Standing water persists > 48h after rain -> flag failed infiltration (clogged media) for rehab.
• Inlet or outlet blocked -> flag for cleaning; the asset isn't capturing runoff.
• Erosion, undercutting, or flow bypassing the asset -> flag for repair.
• Documentation only — no digging out media or altering structures.

What counts as done

• Asset type + overall condition recorded
• Inlet + outlet clear/blocked status recorded
• Standing-water / infiltration observation recorded
• Sediment/trash level + maintenance recommendations + GPS + photos

Proof is measured against these, not judged by taste.