Plant a riparian buffer along the Androscoggin at Riverside Park in Berlin, New Hampshire (2026-07-20)

The riverbank at Riverside Park along the Androscoggin River in Berlin has a bare, eroding strip where mill-era clearing stripped out the native buffer. The city wants native shrubs planted to stabilize the bank and shade the water. Standard: Clean Water Act / EPA watershed protection standard Proof: Photo of the finished buffer row plus a GPS tag and plant count log. Method (Clean Water Act / EPA watershed protection standard): 1. Confirm the buffer planting zone along the riverbank with the host. 2. Clear invasive vegetation from the planting strip. 3. Plant native shrubs and trees at the recommended spacing. 4. Mulch around each new plant. 5. Water each plant and photograph the finished buffer row. Done when: Photo of the finished buffer row plus a GPS tag and plant count log.

Where

Riverside Park, Riverside Dr, Berlin, NH 03570

Pay

$240 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Photo of the finished buffer row plus a GPS tag and plant count log.

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-08-19

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 30–60 minutes. Method of record: EPA dry-weather / AMD field screening

Bring

• GPS phone
• pH meter or strips
• conductivity meter
• ammonia + iron test kit as specified
• surfactant screen if specified
• gloves
• camera

Steps

1. 1. Navigate to the outfall/reach; record GPS; photograph it, capturing any visible flow or staining.
2. 2. Note whether flow is present in dry weather (yes/no).
3. 3. Measure and record pH, conductivity, and each specified analyte per kit instructions.
4. 4. Log any color, odor, floc, or aquatic-life observation.
5. 5. Enter all readings with units, GPS, time, and photos into the proof record; sign.

If it does not match the plan

• Dry-weather flow present with elevated conductivity/ammonia/surfactants -> flag suspected illicit discharge for the responsible agency.
• pH < 6 with visible iron floc -> tag suspected acid mine drainage; recommend metals lab panel.

What counts as done

• pH + conductivity recorded with units
• Each specified analyte recorded with a value
• Dry-weather flow present? recorded yes/no
• GPS waypoint + timestamped photo

Proof is measured against these, not judged by taste.