Patch a cracked stoop on Kensington Avenue in Philadelphia (2026-07-20)

A rowhouse stoop on Kensington Avenue in Philadelphia has a growing crack across the top step that catches feet and lets water seep beneath the concrete. The homeowner needs it patched before it worsens. Standard: Philadelphia Healthy Rowhouse Project envelope-maintenance standard Proof: Before and after photos of the patched stoop plus a GPS tag and cure-date log. Method (Philadelphia Healthy Rowhouse Project envelope-maintenance standard): 1. Clean loose material out of the stoop crack. 2. Mix a concrete or masonry patch compound to match the stoop. 3. Pack the patch into the crack and smooth it level with the surface. 4. Cure the patch per the product instructions. 5. Photograph the repaired stoop and log the cure date. Done when: Before and after photos of the patched stoop plus a GPS tag and cure-date log.

Where

2100 Kensington Ave, Philadelphia, PA 19125

Pay

$200 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Before and after photos of the patched stoop plus a GPS tag and cure-date log.

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-08-19

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 30–60 minutes. Method of record: Minor masonry/concrete stoop-step crack patch — hydraulic-cement first aid for a rowhouse front stoop, entry-level, ground-level only

Bring

• wire brush + shop vac (debris clearing)
• hydraulic cement or concrete patch compound
• trowel + mixing bucket + water
• camera + tape measure

Steps

1. 1. ASSESS: photograph and measure each crack/spall on the stoop tread and risers; confirm the crack is a surface/shallow patch candidate (hairline to ~1/2 inch, not a structural step separation) and that the stoop is stable to stand on.
2. 2. Clear loose debris, dirt and old crumbling material from the crack with a wire brush and shop vac; dampen per the patch product's instructions.
3. 3. Mix and apply the hydraulic cement or concrete patch compound, packing the crack fully and troweling it flush with the surrounding surface.
4. 4. Cure per the product's instructions (keep foot traffic and water off during cure) and photograph the finished patch from the same before vantage.

If it does not match the plan

• A crack wider than ~1/2 inch, a rocking/loose tread, or any sign the step has separated from its structural support -> STOP, do not patch; name it for the intermediate stoop-rebuild job instead.
• Active water intrusion or ice present -> wait for dry, above-freezing conditions before patching.

What counts as done

• Patch fully packed with no voids, flush with the surrounding tread surface
• Before/after photos from a matching vantage
• No loose or crumbling material remains around the patch edge

Proof is measured against these, not judged by taste.