Document the wind-blown dust source.

A vacant unpaved lot along Rancho Rd scours dust across neighboring homes and yards on every desert wind, and no current photo record exists to route the lot to the county's dust-control/vacant-lot program.

Where

vacant unpaved lots along Rancho Rd, Adelanto, CA 92301 · Open the map

Pay

$85 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof

document-only stand-off photo log from the public roadway + GPS + ranked follow-on list

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-10-23

Posted by

0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Bring

• respiratory protection per the site exposure control plan (N95/half-mask)
• tablet/clipboard with the 1926.1153 Table 1 checklist
• camera
• note on the written exposure control plan + fit-test/medical-clearance references
• flashlight

Steps

1. 1. Check in with the competent person; confirm a written exposure control plan exists and list the silica-generating tasks on site (cutting/grinding/drilling/chipping concrete, masonry, or stone). Observe-and-document only.
2. 2. Match each task to OSHA Table 1 and photograph whether the specified engineering control is in use, integrated water delivery (wet cutting) or a dust-collection/HEPA shroud.
3. 3. Verify respiratory protection matches the Table 1 requirement for the task and duration (e.g., N95 / half-mask APF-10) and that workers are wearing it; note any fit-test/medical-clearance the plan references.
4. 4. Check housekeeping: confirm NO dry sweeping or compressed-air cleaning of settled dust, wet methods or a HEPA vacuum must be used.
5. 5. Record the exposure zone: signage, who is inside the dust zone, and whether unprotected workers or bystanders are exposed.
6. 6. Tier each finding against the Table 1 requirement (stop-work / correct-before-proceed / monitor) and name the responsible competent person.
7. 7. Enter photos, GPS/address, the Table 1 checklist, plan status, and the tiered findings; sign. Route stop-work items to the competent person and any suspected exceedance to an industrial hygienist.

What counts as done

• Photos of the unpaved lot's visible dust source (bare soil extent, wind-scour patterns) taken from the public roadway
• Wind conditions at the time of the visit noted
• GPS waypoint confirming the observation point
• Ranked follow-on list naming the item for the county dust-control/vacant-lot program

Proof is measured against these, not judged by taste.