Seal the drafts the weatherization survey finds: Lastchance Public Library, Helena MT.

Seal the drafts around trim, doors, and penetrations with caulk and weatherstripping at Lastchance Public Library, Helena MT. Read all of it

Not funded yet. Settles as earned credit, $105 proposed.

Vote for it

Proof it takes, the deadline, the level

Proofbefore/after photos per location + continuous-caulk-bead confirm + weatherstrip compression check + door/window function check
Open until2026-10-23
Levelentry

All of it: the words, the place, the proof

Seal the drafts around trim, doors, and penetrations with caulk and weatherstripping at Lastchance Public Library, Helena MT. This is occupant-safe work: no combustion and no lead-paint work, and the weatherization-readiness check is what found them. Drafts leak in through gaps around the window and door trim, the doors and the wall penetrations.

Fund it for $105. The receipt lands onchain once the proof is approved.

What it looks like: A worker runs a caulk gun along the gaps around window trim at Lastchance Public Library, then presses weatherstripping onto the door edge so the draft stops.
A description of this kind of work, not a record that it happened here.
Where: Succ Weatherize, Lastchance Public Library, Helena MT. Open the map
Pay: $105 proposed
This job is not funded yet, so this figure is a proposed price, not money held for the worker. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.
Proof: before/after photos per location + continuous-caulk-bead confirm + weatherstrip compression check + door/window function check
This is exactly what gets it approved. Nothing settles without it.
Level: entry: anyone can start here
Open until: 2026-10-23
Posted by: 0x034F…6c89
The creator wallet. Its signature is what approves proof and settles the wage.

Safety, read before you claim

STOP on a pre-1978 home with peeling/chipping paint at the work surface, route to an EPA RRP lead-safe certified pro, never scrape it yourself. Never tighten a combustion-air/venting path near a gas appliance, water heater, or fireplace (backdraft/CO risk).

The full safety list for this job:

Fix active moisture/mold/rot at an opening before sealing it in.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Bring

camera
caulk gun + paintable/silicone caulk
weatherstripping + door sweeps
foam outlet/switch gaskets
utility knife + putty knife
tape measure
gloves + safety glasses

Steps

1. Photograph each draft location (window trim, door, outlet, penetration) before sealing.
2. Confirm the home is post-1978 or the surfaces are lead-safe; if pre-1978 with disturbed paint, STOP and flag for a lead-safe pro.
3. Clean and dry each gap; remove old failed caulk/weatherstrip with the putty knife.
4. Apply a continuous caulk bead to fixed gaps (window/door trim, penetrations) and tool it smooth.
5. Install weatherstripping on operable window/door edges so it compresses without binding the sash/door.
6. Fit door sweeps to exterior doors and foam gaskets behind outlet/switch plates on exterior walls.
7. Verify each treated opening closes/latches and the seal is continuous; photograph the finished work.
8. Enter locations sealed, materials used, before/after photos, and any flagged hazard into the proof record; sign.

What counts as done

Before and after photos of each sealed location
Continuous caulk bead on fixed gaps and weatherstripping that compresses without binding
Door sweeps and outlet gaskets installed on exterior openings/walls as scoped
Every treated door/window still closes and latches after sealing

Proof is measured against these, not judged by taste.

The standard this serves

DIY Weatherization and Air Sealing. Air sealing is the cheapest energy work there is, and the Department of Energy has spent decades proving it: a tube of caulk and a roll of weatherstrip, placed where the cold actually comes in, beat almost any gadget you can buy. This standard keeps the work occupant-safe: no wiring, no combustion equipment, no disturbing old paint. Mastery looks like hands that can find a draft with a bare palm and close it for good. This packet is one home's worth of that: find the gaps, seal them, photograph the proof.

What is promised, and what is not

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage, plus one Vealth service fee of 10% shown apart; the worker is paid the whole wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1784866208380_nk1wy61","funderWallet":"0xYOU"}.

Open, but not claimable yet. restricted: regulated. Regulated or permit-required work cannot be claimed on this rail yet. It stays readable; voting and pledging are free, and funding is separate from claiming.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.

Other acts: vote, pledge, fund

Pledge backing, free

Packet WORK_1784866208380_nk1wy61