Install a point-of-use water filter.

Install an NSF/ANSI-certified point-of-use filter on the tap or spigot this source feeds at Arleta community center, Los Angeles CA. The potability test flagged a contaminant, so size the filter to it and confirm the fix with a retest. A potability test flagged a contaminant in the water from this tap, and the tap has no point-of-use filter. The tap delivers water that a potability test flagged as contaminated, and nothing at the tap treats it. For the payer: - Price: $85 per job, counted in filters installed. - Likely payer: The building's owner or manager, paying directly. - License: CSLB C-36 Plumbing for the pipe connection; C-55 Water Conditioning for the filter.

Fund it for $85. The receipt lands onchain once the proof is approved.

What it looks like

The owner's licensed plumber shuts off the water supply, cuts the tubing with a tubing cutter and wrenches a certified point-of-use filter onto the tap, while the crew tags the fixture out of service.

A description of this kind of work, not a record that it happened here.

Where

Succ Drinking Water Safety, Arleta community center, Los Angeles CA. Open the map

Pay

$85 proposed

This job is not funded yet, so this figure is a proposed price, not money held for the worker. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof

before/after test readings + NSF/ANSI label photo + install date/next-service label + GPS waypoint: Real, Proven, One-of-one

This is exactly what gets it approved. Nothing settles without it.

Level

advanced

Open until

2026-10-23

Posted by

0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

Start after the crew's safety orientation. Stop and route this job to the owner's licensed plumber, the water utility and the local health department: a flagged drinking water result is theirs to treat and re-sample, no crew plumbs, cuts, joins or re-tests a drinking supply on this program, and no one solders or sweats copper. Whoever installs never says the water is fit to drink; only a State-accredited laboratory result, read by the owner and the health department, says anything about the water; wear slip-resistant closed-toe shoes and nitrile gloves.

The full safety list for this job:

• A systemic municipal or utility-source contamination, or a whole-building lead result at or above the EPA action level, is not DIY-scoped.
• Point-of-entry treatment and service-line work route to the water utility, the local health department, or a licensed plumber.
• STOP and route to the water utility, the local health department, or a licensed plumber if the contamination is systemic.
• A point-of-use filter does not remove every contaminant: lead, nitrate, PFAS, bacteria and disinfection byproducts each need a different treatment, and a wrong cartridge or one past its change date can grow bacteria and give false comfort. A first-draw sample and a flushed sample give different numbers; the owner's sampling plan says which counts. Keep the tap tagged out of service until the owner's plumber returns it. No one adds chlorine or any chemical to a drinking supply on this program.
• Orientation to the plan before touching a drinking supply: who to call, what to stop for (Title 8 section 3203).
• Labels and Safety Data Sheets for thread sealant, cleaners and any sanitizer used on the device (Title 8 section 5194).
• Eye protection under a sink; water and debris fall in the face (Title 8 section 3382).
• Older brass and solder can hold lead: no cutting, sanding or heating of old joints on this job (Title 8 section 1532.1).
• Gear, Title 8 sections 3385 and 3384: slip-resistant closed-toe shoes for wet floors and dropped fixtures; nitrile gloves for descaler, cleaners and sealant.
• Held until a licensed crew does it: it takes a CSLB C-36 license and the owner's or agency's written permit for this exact work, both recorded before any work starts.

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage, plus one Vealth service fee of 10% shown apart; the worker is paid the whole wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1784869150777_w1nvrax","funderWallet":"0xYOU"}.

Open, but not claimable yet. restricted: permit-required, regulated. Regulated or permit-required work cannot be claimed on this rail yet. It stays readable; voting and pledging are free, and funding is separate from claiming.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.