Retrofit a home garden bed to drip irrigation at a resident's own home on the Park Ave corridor, home 1, resident home, Park Ave corridor, Hereford, TX 79045

This household's garden bed is still watered by an open hose-end sprinkler that loses much of its water to evaporation and wind drift, drawing needlessly on the depleting Ogallala Aquifer. Standard: EPA WaterSense fixture flow-rate + leak audit (indoor water conservation) + irrigation efficiency practice, SDG 6.4 water-use efficiency, direct relevance to Ogallala Aquifer conservation on the High Plains. Proof: homeowner/resident-permission record + before/after photos + emitter-count/flow-rate record + no-runoff confirm + GPS Method (EPA WaterSense fixture flow-rate + leak audit (indoor water conservation) + irrigation efficiency practice, SDG 6.4 water-use efficiency, direct relevance to Ogallala Aquifer conservation on the High Plains.): 1. 1. Walk the resident's own garden or landscape bed with the resident and photograph the existing hose-end or spray watering setup before retrofitting. 2. 2. Shut off the hose-bib supply and remove the hose-end sprinkler or spray head. 3. 3. Attach a pressure-regulated drip-irrigation kit (backflow preventer, filter, pressure regulator, drip line, emitters) sized to the bed at the hose bib. 4. 4. Run the kit and photograph water reaching each plant's root zone with no surface runoff, recording emitter count and flow rate. Done when: homeowner/resident-permission record + before/after photos + emitter-count/flow-rate record + no-runoff confirm + GPS

Where

resident home, Park Ave corridor, Hereford, TX 79045

Pay

$120 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

homeowner/resident-permission record + before/after photos + emitter-count/flow-rate record + no-runoff confirm + GPS

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-08-23

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 45–90 minutes. Method of record: EPA WaterSense fixture flow-rate + leak audit

Bring

• flow-rate measurement bag + timer
• toilet dye tablets
• moisture meter
• GPS / address
• camera
• tablet / data sheet

Steps

1. 1. Confirm the address; get a staff escort; photograph each fixture group.
2. 2. Measure flow rate at each faucet/shower with the bag-and-timer method; record gallons per minute (gpm).
3. 3. Test each toilet for leaks with a dye tablet (wait 10 min, check for color in the bowl); record flush volume.
4. 4. Inspect fixtures, meters, and irrigation for visible leaks/drips; note each.
5. 5. Read the water meter with all fixtures off; note any movement (indicates a hidden leak).
6. 6. Rank WaterSense fixture upgrades + leak repairs by estimated water/cost savings.
7. 7. Record flow rates, leak results, meter check, ranked measures, and photos into the proof record; sign.

If it does not match the plan

• Meter moving with all fixtures off AND active water damage (wet drywall, ceiling stain, pooling near electrical) -> STOP: possible electrical exposure; keep clear, route to a licensed plumber (and electrician if water contacts wiring). The agent documents, never opens walls.
• Suspected cross-connection / backflow risk (hose-bib, irrigation, boiler makeup) -> flag for a licensed plumber backflow test; potable-water contamination is a health hazard — do not test-operate the connection.
• Toilet dye migrates into the bowl -> flag a leaking flapper/valve for repair.
• Meter moves with all fixtures off -> flag a hidden leak for investigation.
• Faucet > 2.2 gpm or showerhead > 2.0 gpm -> recommend a WaterSense upgrade.
• No electrical/gas work; documentation only — flag suspected pipe damage, do not disassemble.

What counts as done

• Flow rate (gpm) recorded per fixture
• Toilet leak result + flush volume recorded per toilet
• Meter-with-all-off check recorded
• Ranked upgrade/repair measures + photos + address confirm

Proof is measured against these, not judged by taste.