intermediate work · S Cedar Street (US Highway 285) corridor, Pecos, TX 79772 (public right-of-way)
Clear debris from a public desert-arroyo road culvert opening on S Cedar Street, culvert 2, S Cedar Street (US Highway 285) corridor, Pecos, TX 79772 (public right-of-way) (2026-07-24)
A public road culvert carrying a desert arroyo under S Cedar Street is choked with drifted sand and brush at its opening, and the next Permian Basin flash-flood downpour will have nowhere to go but over the road. Standard: FEMA floodplain + green-infrastructure siting screen, applied here to Permian Basin flash-flood-prone roadside ditches and desert arroyo culverts around Pecos. SDG 11.5 disaster resilience. Proof: dry-conditions confirm + before/after photos + debris-volume log + GPS Method (FEMA floodplain + green-infrastructure siting screen, applied here to Permian Basin flash-flood-prone roadside ditches and desert arroyo culverts around Pecos. SDG 11.5 disaster resilience.): 1. 1. In dry conditions with no flowing water present, confirm from the road shoulder that the public arroyo culvert's inlet or outlet opening is clear of standing or moving water, and photograph the blocked opening as found. 2. 2. Hand-clear surface debris (drifted sand, brush, trash) from the visible culvert opening using a rake or grabber, staying entirely outside the culvert barrel. 3. 3. Never enter the culvert barrel or any vault, and stop immediately and reschedule if water begins flowing or rain is approaching. 4. 4. Photograph the cleared opening from the matching before vantage and log the debris volume removed. Done when: dry-conditions confirm + before/after photos + debris-volume log + GPS
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 45–90 minutes. Method of record: FEMA floodplain + green-infrastructure siting screen
Bring
- GPS phone
- tape/ruler for deposition depth
- metals field kit (if sediment screen in scope)
- boots + gloves
- camera
Steps
- 1. Confirm post-event conditions are safe; navigate to the site; record GPS.
- 2. Photograph deposited sediment / affected area.
- 3. Measure deposition depth at representative points.
- 4. If a sediment contaminant screen is in scope, run the metals field kit and record values.
- 5. Note debris, hazards, and the extent (sketch).
- 6. Enter depth, any analytes, hazard notes, GPS, photos into the proof record; sign.
If it does not match the plan
- Unstable ground / submerged debris / contaminated water -> document from safe footing; do not enter.
- Elevated metals in deposited sediment -> flag before any reuse; recommend lab confirm.
What counts as done
- Deposition depth recorded at representative points
- Metals screen recorded (if in scope)
- Debris/hazard note + extent sketch
- GPS waypoint + timestamped photos
Proof is measured against these, not judged by taste.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.