Anyone can start here · resident homes along the Wilbarger Street / Main Street corridor, Vernon, TX 76384 (own-home)
Document yard-drainage ponding at a resident's own home on the corridor, home 2, resident homes along the Wilbarger Street / Main Street corridor, Vernon, TX 76384 (own-home) (2026-07-27)
This home's yard ponds water near the foundation after a Rolling Plains downpour, on flat, poorly draining caliche soil, and no record exists yet to prioritize a professional regrade. Standard: FEMA floodplain and green stormwater infrastructure siting screen, applied here to Rolling Plains flash flood and semiarid caliche-soil drainage conditions around Vernon. SDG 11.5 disaster resilience. Proof: homeowner/resident-permission record + document-only photo log + resident-interview note + GPS + ranked follow-on note Method (FEMA floodplain and green stormwater infrastructure siting screen, applied here to Rolling Plains flash flood and semiarid caliche-soil drainage conditions around Vernon. SDG 11.5 disaster resilience.): 1. 1. Walk the resident's own dry yard with the resident and photograph any low spots, ponding stains, or erosion channels from a normal standing position. 2. 2. Note where downspouts discharge and whether water pools near the foundation on the home's clay-heavy soil. 3. 3. Ask the resident when and how badly the yard has ponded during past storms and record their answer. 4. 4. Record a ranked follow-on note naming the yard for a licensed grading contractor's regrade visit. Done when: homeowner/resident-permission record + document-only photo log + resident-interview note + GPS + ranked follow-on note
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 45–90 minutes. Method of record: FEMA floodplain + green-infrastructure siting screen
Bring
- GPS phone
- tape/ruler for deposition depth
- metals field kit (if sediment screen in scope)
- boots + gloves
- camera
Steps
- 1. Confirm post-event conditions are safe; navigate to the site; record GPS.
- 2. Photograph deposited sediment / affected area.
- 3. Measure deposition depth at representative points.
- 4. If a sediment contaminant screen is in scope, run the metals field kit and record values.
- 5. Note debris, hazards, and the extent (sketch).
- 6. Enter depth, any analytes, hazard notes, GPS, photos into the proof record; sign.
If it does not match the plan
- Unstable ground / submerged debris / contaminated water -> document from safe footing; do not enter.
- Elevated metals in deposited sediment -> flag before any reuse; recommend lab confirm.
What counts as done
- Deposition depth recorded at representative points
- Metals screen recorded (if in scope)
- Debris/hazard note + extent sketch
- GPS waypoint + timestamped photos
Proof is measured against these, not judged by taste.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.