Anyone can start here · resident homes along the Holland Avenue / US Highway 90 corridor and near Kokernot Park, Alpine, TX 79830 (own-home)
Stabilize bare, wind-exposed yard ground against dust at a resident's own home, home 1, resident homes along the Holland Avenue / US Highway 90 corridor and near Kokernot Park, Alpine, TX 79830 (own-home)
This home's bare, wind-exposed yard or driveway edge blows loose dust into the living space every windy Trans-Pecos afternoon, and mulch or gravel would hold it in place. Standard: USDA NRCS Soil Health assessment and restoration practice (infiltration, aggregate stability, organic matter, native root structure), applied here to Brewster and Jeff Davis Counties' Chihuahuan Desert grassland and sky-island montane woodland under brush encroachment, bare-ground erosion, and wind-driven dust. SDG 15.3 land degradation neutrality. Proof: homeowner/resident-permission record + before/after photos + material-used record + area-covered estimate + GPS Method (USDA NRCS Soil Health assessment and restoration practice (infiltration, aggregate stability, organic matter, native root structure), applied here to Brewster and Jeff Davis Counties' Chihuahuan Desert grassland and sky-island montane woodland under brush encroachment, bare-ground erosion, and wind-driven dust. SDG 15.3 land degradation neutrality.): 1. 1. Walk the resident's own bare, wind-exposed yard or driveway edge with the resident and photograph the dust-prone bare soil before starting. 2. 2. Spread mulch or gravel, or broadcast a native seed and wind-fabric mix, over the bare soil to hold it against wind. 3. 3. Pin any wind fabric flush to the ground with stakes so wind cannot lift an edge. 4. 4. Photograph the stabilized surface from the matching before vantage and record the material used and approximate area covered. Done when: homeowner/resident-permission record + before/after photos + material-used record + area-covered estimate + GPS
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 45–90 minutes. Method of record: USDA-NRCS soil-health in-situ assessment
Bring
- soil auger or trowel
- infiltration ring + measured water + timer
- penetrometer (if compaction in scope)
- clean bucket
- sample bags + labels
- gloves
- GPS phone
- camera
Steps
- 1. Navigate to the plot; record GPS; sketch the sampling layout.
- 2. Photograph each sampling station.
- 3. Run the infiltration ring; record time to infiltrate 1 inch.
- 4. Assess aggregate stability and note visible organic matter, roots, and biology.
- 5. If compaction is in scope, record penetrometer resistance by depth.
- 6. Collect 0-15 cm cores if a lab subsample is specified; bag, label, complete COC.
- 7. Enter all measurements with units + depth, GPS, photos into the proof record; sign.
If it does not match the plan
- Infiltration > 30 min/inch or high penetrometer resistance -> flag compaction; recommend cover crop / reduced traffic.
- Very low organic matter / no visible biology -> flag degraded; recommend amendment plan.
What counts as done
- Infiltration time recorded
- Aggregate stability + organic-matter observation recorded
- Each in-scope measurement recorded with units and depth
- GPS waypoint + station photos + site sketch
Proof is measured against these, not judged by taste.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.