Document a San Felipe Springs spring run bank at San Felipe Natural Spring Park, site 1, San Felipe Natural Spring Park, 401 Mario Salas Ave, Del Rio, TX 78840 (public city park) (2026-07-29)

This spring run bank at San Felipe Natural Spring Park feeds Del Rio's municipal drinking water source, and its bare, eroding, or litter strewn edge has no photo record to prioritize it for restoration. Standard: Gold Standard Water Benefit Standard source protection zone monitoring practice, applied here to San Felipe Springs, one of the largest artesian springs in Texas and the municipal drinking water source for Del Rio, Val Verde County, Texas. SDG 6.1 and 6.6. Proof: document only stand off photo log plus bank condition note plus GPS plus ranked follow on note Method (Gold Standard Water Benefit Standard source protection zone monitoring practice, applied here to San Felipe Springs, one of the largest artesian springs in Texas and the municipal drinking water source for Del Rio, Val Verde County, Texas. SDG 6.1 and 6.6.): 1. 1. From an established park trail, photograph a San Felipe Springs spring run segment's bank without entering the water. 2. 2. Note whether the bank shows bare ground, erosion, invasive choked vegetation, or litter. 3. 3. Photograph the nearest trail marker or park sign for the crew's reference. 4. 4. Record a ranked follow on note naming the segment for the source protection restoration crew. Done when: document only stand off photo log plus bank condition note plus GPS plus ranked follow on note

Where

San Felipe Natural Spring Park, 401 Mario Salas Ave, Del Rio, TX 78840 (public city park)

Pay

$90 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

document only stand off photo log plus bank condition note plus GPS plus ranked follow on note

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-08-28

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 45–90 minutes. Method of record: Gold Standard Water Benefit Standard (WBS) — source-water protection zone condition walk (catchment/spring/recharge-area buffer inspection) feeding the project's Water Benefit Certificate (WBC) monitoring requirements.

Bring

• GPS-capable phone or survey-grade GPS
• camera
• tape measure or laser rangefinder (buffer distance checks)
• field checklist/tablet
• waterproof notebook
• PPE (gloves/boots)
• flagging tape

Steps

1. 1. Navigate to the registered source-protection zone boundary (spring box, recharge basin, wellhead, catchment intake); confirm GPS matches the project's registered site ID.
2. 2. Photograph the source point and the immediate protective perimeter (fencing/buffer condition, vegetation cover, any encroachment).
3. 3. Walk the protection-zone buffer checking for contamination-risk indicators (livestock access, latrine proximity, agrochemical storage/use, solid-waste dumping, open defecation) and log each with a GPS waypoint and photo.
4. 4. Inspect the physical source infrastructure (spring box lid/seal, wellhead cap, intake screen, diversion structure) for damage or breach.
5. 5. Record any encroachment (new structures, cultivation, grazing) inside the registered buffer since the last visit.
6. 6. Note upstream/uphill land-use changes visible from the protection zone that could affect source-water quality.
7. 7. Complete the source-protection condition checklist per the project's WBS monitoring plan.
8. 8. Enter site ID, GPS, photos, checklist, and any flagged risk into the proof record; sign.

If it does not match the plan

• Any breach of the physical source infrastructure (broken seal, damaged spring box, exposed wellhead) -> flag immediately for repair before the next scheduled visit; never leave an active contamination pathway unflagged.
• Encroachment or a new contamination-risk indicator inside the registered buffer -> flag for the project proponent/local water committee; never resolve or negotiate access on-site.

What counts as done

• GPS matches the registered source-protection site ID within the posting radius
• Photo of the source point and protective perimeter captured
• Full buffer walk completed with every required contamination-risk indicator checked and logged
• Source-protection condition checklist completed per the project's monitoring plan

Proof is measured against these, not judged by taste.