Plant a native tree buffer row along the industrial corridor, site 4, public right of way, residential streets bordering the port and rail industrial corridor, Galena Park and Jacinto City, TX (2026-07-29)

The survey above found a bare tree gap between this residential street and the port and rail industrial corridor, and a hand planted native shade tree buffer row would otherwise soften dust, noise, and summer heat for these homes. Standard: ISA arboriculture best management practices plus municipal urban forestry standard, applied here to the industrial corridor tree buffer between the port and rail zone and residential blocks in Galena Park and Jacinto City, Harris County, Texas. SDG 11.7 and 15.1. Proof: before after photos plus utility locate confirm plus species and count record plus GPS Method (ISA arboriculture best management practices plus municipal urban forestry standard, applied here to the industrial corridor tree buffer between the port and rail zone and residential blocks in Galena Park and Jacinto City, Harris County, Texas. SDG 11.7 and 15.1.): 1. 1. Confirm the planting location is public right of way and call for utility locates before any digging. 2. 2. Hand dig planting pits sized to each tree's root ball, hand tools only, no power digging equipment. 3. 3. Set and stake each native shade tree at the design spacing, backfill, and mulch the pit. 4. 4. Photograph the planted buffer row from the matching before vantage and record species and count. Done when: before after photos plus utility locate confirm plus species and count record plus GPS

Where

public right of way, residential streets bordering the port and rail industrial corridor, Galena Park and Jacinto City, TX

Pay

$165 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

before after photos plus utility locate confirm plus species and count record plus GPS

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-08-28

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 30–60 minutes. Method of record: i-Tree canopy / street-tree inventory

Bring

• GPS phone
• DBH tape or measuring tape
• tree ID reference
• camera
• hi-vis vest

Steps

1. 1. Walk the corridor; record a GPS waypoint at each tree.
2. 2. Photograph each surveyed tree.
3. 3. Record species (best estimate), condition class (good/fair/poor/dead), and DBH (diameter at breast height).
4. 4. Count vacant planting sites.
5. 5. Enter the per-tree records, vacant-site count, GPS, photos into the proof record; sign.

If it does not match the plan

• Dead or hazardous tree observed -> flag for the responsible agency (no removal by surveyor).
• High vacant-site count -> recommend a planting plan for the corridor.

What counts as done

• Per-tree species + condition + DBH recorded
• Vacant planting sites counted
• GPS waypoint per tree
• Photo per surveyed tree

Proof is measured against these, not judged by taste.