Anyone can start here · Pine Springs Visitor Center, 400 Pine Canyon Drive, Salt Flat, TX 79847 (public National Park Service visitor center at the mouth of Pine Springs Canyon)
Document a canyon mouth wash segment near the Pine Springs Visitor Center, site 2, Pine Springs Visitor Center, 400 Pine Canyon Drive, Salt Flat, TX 79847 (public National Park Service visitor center at the mouth of Pine Springs Canyon) (2026-07-30)
This canyon mouth wash segment near the Pine Springs Visitor Center shows invasive plant cover or bare eroding soil with no photo record to prioritize it for hand restoration. Standard: USDA NRCS CPS 391 riparian forest buffer plus EPA nonpoint source BMP practice, applied here to the Pine Springs Canyon mouth riparian corridor near the Pine Springs Visitor Center, Guadalupe Mountains National Park, Culberson County. SDG 6.6 and 15.1. Proof: document only stand off photo log plus segment condition note plus GPS plus ranked follow on note Method (USDA NRCS CPS 391 riparian forest buffer plus EPA nonpoint source BMP practice, applied here to the Pine Springs Canyon mouth riparian corridor near the Pine Springs Visitor Center, Guadalupe Mountains National Park, Culberson County. SDG 6.6 and 15.1.): 1. 1. From the established path near the Pine Springs Visitor Center, photograph a bare or invasive choked canyon mouth wash segment without leaving the visitor center apron. 2. 2. Note whether the segment shows invasive plant cover, bare eroding soil, or intact native canyon mouth cover. 3. 3. Photograph the Pine Springs Visitor Center building for reference. 4. 4. Record a ranked follow on note naming the segment for the restoration crew. Done when: document only stand off photo log plus segment condition note plus GPS plus ranked follow on note
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 90–180 minutes. Method of record: Urban-creek riparian restoration install (native buffer planting, bank stabilization, invasive/litter removal) per NRCS CPS 391 riparian forest buffer + EPA nonpoint-source BMP practice -- hands-on restoration, not a bioassessment survey; assess->clear->plant/stabilize->verify
Bring
- shovel / dibble bar
- native bare-root or plug plantings (locally sourced)
- erosion-control matting or willow stakes (bank-stabilization sites)
- loppers / hand saw (invasive removal)
- gloves + trash bags (litter pass)
- camera
- GPS-enabled phone
Steps
- 1. Walk the reach with the site plan (or the standing bioassessment/watershed-health finding, if one exists) and photograph the bank/buffer segment as found: bare soil, invasive cover, litter, erosion.
- 2. Clear invasive growth and litter from the planting zone by hand, bagging trash separately from green waste; leave native volunteers in place.
- 3. Plant native riparian species (or set willow stakes / erosion-control matting) at the spacing and depth the site plan calls for, working from the top of bank downward; water each planting in.
- 4. Stake or anchor any erosion-control matting so it will not lift in the next high-flow event, and mulch around new plantings kept clear of stems.
- 5. Photograph the finished segment from the matching vantage, record species/count or matting area installed, and note any follow-up watering the planting needs.
If it does not match the plan
- Steep, actively eroding or undercut bank -> stabilize with matting/stakes before planting; never plant into a bank that is still actively failing.
- Standing or fast-moving water in the work zone -> stay on the bank, never enter the channel; document from the bank and reschedule if the reach is unsafe.
- Suspected illicit discharge, sheen, or odor in the reach -> stop, photograph from a safe distance, do not touch, and report to the MS4/311 line rather than working through it.
What counts as done
- Before photo of the reach segment (bare soil, invasive cover, litter, or erosion as found)
- Invasive/litter removal photo-documented, green waste separated from trash
- Planting or matting installed to spec (species/count or matting area recorded) with after photo from matching vantage
- Erosion-control matting/stakes secured against the next high-flow event, and follow-up watering need noted
Proof is measured against these, not judged by taste.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.