a community building in Sacramento, CA
Install a ventilation fan.
Install a ventilation fan at a community building in Sacramento, CA. Read all of it
Not funded yet. Settles as earned credit, $420 proposed.
Proof it takes, the deadline, the level
- Proofbefore/after photo + CO2 reading comparison
- Open until2027-07-31
- Levelintermediate
All of it: the words, the place, the proof
Install a ventilation fan at a community building in Sacramento, CA. A room at a community building in Sacramento, CA traps humidity and stale air with no mechanical ventilation. A properly vented fan clears moisture and improves the air.
Fund it for $420. The receipt lands onchain once the proof is approved.
Safety, read before you claim
Plug-in or existing-switch-operated unit only: no new circuit or panel work; if hard-wiring is needed, stop and route to a licensed electrician.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- Record the site's exact name and address and the contact who agreed to the work.
- Take a CO2 reading in the vestibule before the fan is installed.
- Photograph the vestibule showing no fresh-air fan in place.
- Mount the plug-in or switch-operated fan unit at its intended location.
- Connect the fan to the existing plug or switched circuit and turn it on.
- Run the fan for a service and take a second CO2 reading during that run.
- Photograph the installed fan running.
- Record the CO2 reading comparison showing the before and after results.
What counts as done
- Before photo of the vestibule with no fresh-air fan
- After photo of the installed plug-in/switch-operated fan
- CO2 reading comparison before/after a service with the fan running
- Site record: the exact site's name and street address, and the contact who agreed to the work
Proof is measured against these, not judged by taste.
The standard this serves
Indoor Air Quality. Indoor air quality is the health of the air where people actually live, and most of us are indoors nine hours in ten. The standards give it numbers: carbon dioxide that tells whether fresh air is reaching a room, fine dust, fumes from finishes, moisture that invites mold. Mastery looks like reading a room's air the way a doctor reads a pulse, and knowing which fix matters first. It is learned meter in hand. This packet is one room measured honestly, and one measured room is worth a hundred guesses.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage, plus one Vealth service fee of 10% shown apart; the worker is paid the whole wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1785457583104_2v4q8if","funderWallet":"0xYOU"}.
Open, but not claimable yet. restricted: regulated. Regulated or permit-required work cannot be claimed on this rail yet. It stays readable; voting and pledging are free, and funding is separate from claiming.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1785457583104_2v4q8if