Repair the evaporative cooler pad.

A worker switches off and unplugs the evaporative cooler at any resident's own home in Phoenix, swaps the scaled pads for new pads and checks the belt tension, leaving fresh pads in the cabinet. Read all of it

Not funded yet. Settles as earned credit, $300 proposed.

Claim this job

Proof it takes, the deadline, the level

Proofbefore photo of the scaled/worn pads and belt + after photo of the new pads installed + belt-tension check note + GPS
Open until2027-07-31
Levelintermediate

All of it: the words, the place, the proof

Repair the evaporative cooler pad in Phoenix, AZ. This packet does not assert a surveyed condition beyond that. The proof requirements listed on this packet are what counts as done. The cooler's pads are scaled and its belt is worn.

Fund it for $300. The receipt lands onchain once the proof is approved.

What it looks like: A worker switches off and unplugs the evaporative cooler at any resident's own home in Phoenix, swaps the scaled pads for new pads and checks the belt tension, leaving fresh pads in the cabinet.
A description of this kind of work, not a record that it happened here.
Where: any resident's own home in Phoenix, AZ. Open the map
Pay: $300 proposed
This job is not funded yet, so this figure is a proposed price, not money held for the worker. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.
Proof: before photo of the scaled/worn pads and belt + after photo of the new pads installed + belt-tension check note + GPS
This is exactly what gets it approved. Nothing settles without it.
Level: intermediate
Open until: 2027-07-31
Posted by: 0x034F…6c89
The creator wallet. Its signature is what approves proof and settles the wage.

Safety, read before you claim

Window or ground and side-yard mounted units only; a roof-mounted cooler is out of scope and routes to a licensed HVAC technician. Power off and unplug the unit at the switch before opening the cabinet or belt guard.

The full safety list for this job:

Owner or occupant consent precedes work.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Steps

Get the owner or occupant's consent before starting work at the home named in this job's title.
Confirm the unit is window-, ground-, or side-yard-mounted.
Power off and unplug the unit at its switch before opening the cabinet or belt guard.
Take a before photo of the scaled pads and worn belt.
Replace the old pads with new pads installed in the unit.
Check the belt tension and the water-supply and float condition.
Take an after photo of the new pads installed.
Record a note on the belt-tension and water-supply/float check.

What counts as done

Before photo of the scaled pads and worn belt
After photo of the new pads installed
Belt-tension and water-supply/float check note

Proof is measured against these, not judged by taste.

The standard this serves

Energy Efficiency Audit. Energy efficiency work begins with the walkthrough audit, the kind the ASHRAE standard describes: a trained eye moving through a building, reading the bills, the walls, the lights, and the equipment, and coming out with the short list of fixes worth doing first. Mastery looks like an auditor who can feel where a building is bleeding money within the hour, and prove it on paper. That instinct is trained by repetition on real buildings. This packet is one repetition: one system observed, one reading taken, one finding recorded the way the standard asks.

What is promised, and what is not

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment, made by the payer straight to the worker, with no Vealth fee. Paying Vealth is closed: Vealth takes no new card or wallet payment for a job. To fund a job, offer to pay the worker directly, then pay them yourself when you accept the proof, from your own wallet or by your own card or bank. From a wallet: prepare_token_offer, sign, submit_token_offer; after the proof is accepted you pay the worker on chain and the worker records it (prepare_token_settlement, or POST /labor/settle for USDC on Base). By card or bank: prepare_direct_offer, sign, submit_direct_offer; you pay the worker yourself and the worker records it with prepare_direct_settlement. Both are free, need no gas, and move no money through Vealth.

Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.

Other acts: vote, pledge, fund

Vote for it, free Pledge backing, free

Packet WORK_1785461576472_zdylu1n