Install the low-flow fixtures the audit finds.

At the site, a worker photographs the WaterSense label on a certified low-flow replacement with a camera, then removes the old aerator or valve and fits the replacement. Read all of it

Not funded yet. Settles as earned credit, $95 proposed.

Vote for it

Proof it takes, the deadline, the level

Proofbefore/after flow-rate readings per fixture + WaterSense label photo + leak retest + GPS
Open until2026-10-30
Levelintermediate

All of it: the words, the place, the proof

Install certified low-flow aerators and valves at a community building in Falls Church, VA. The water audit is expected to find fixtures running above WaterSense flow limits, and the swap cuts the draw immediately. Confirm with the site's host before you claim: this listing does not mean the site asked for the work.

Fund it for $95. The receipt lands onchain once the proof is approved.

What it looks like: At the site, a worker photographs the WaterSense label on a certified low-flow replacement with a camera, then removes the old aerator or valve and fits the replacement.
A description of this kind of work, not a record that it happened here.
Where: Succ Fixture Check Dar Al Hijrah Islamic Center, a community building in Falls Church, VA. Open the map
Pay: $95 proposed
This job is not funded yet, so this figure is a proposed price, not money held for the worker. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.
Proof: before/after flow-rate readings per fixture + WaterSense label photo + leak retest + GPS
This is exactly what gets it approved. Nothing settles without it.
Level: intermediate
Open until: 2026-10-30
Posted by: 0x034F…6c89
The creator wallet. Its signature is what approves proof and settles the wage.

Safety, read before you claim

Intermediate skill; do not solder or sweat copper, which needs a licensed plumber. Get occupant or manager consent before work, and shut off the local supply before removing a fixture.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Steps

Record the host contact name, role, and agreement date.
Record the before flow rate for each targeted aerator or valve fixture.
Photograph the WaterSense label on each replacement part before fitting it.
Remove the targeted aerator or valve and install the certified low-flow replacement.
Record the after flow rate and run the toilet dye-leak retest for each targeted toilet.
Photograph the installed fixtures and record the GPS.

What counts as done

Before flow-rate reading (gpm) per targeted fixture
WaterSense label photo of each installed fixture
After flow-rate reading confirming the reduction
Toilet dye-leak retest showing no leak
Host confirmation: the site contact's name and role, and the date they agreed

Proof is measured against these, not judged by taste.

The standard this serves

Water Efficiency. Water efficiency is the quiet discipline of wasting nothing indoors. The EPA's WaterSense program sets the marks: how many gallons a minute a faucet should pass, how to find the leak that runs a toilet all night, how a household's water bill tells a story. Mastery looks like an auditor who can walk a home in an hour and find every hidden gallon. The skill is built one fixture at a time, which is exactly what this packet asks: measure one flow, find one leak, record one truth about where the water goes.

What is promised, and what is not

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment, made by the payer straight to the worker, with no Vealth fee. Paying Vealth is closed: Vealth takes no new card or wallet payment for a job. To fund a job, offer to pay the worker directly, then pay them yourself when you accept the proof, from your own wallet or by your own card or bank. From a wallet: prepare_token_offer, sign, submit_token_offer; after the proof is accepted you pay the worker on chain and the worker records it (prepare_token_settlement, or POST /labor/settle for USDC on Base). By card or bank: prepare_direct_offer, sign, submit_direct_offer; you pay the worker yourself and the worker records it with prepare_direct_settlement. Both are free, need no gas, and move no money through Vealth.

Open, but not claimable yet. restricted: regulated. Regulated or permit-required work cannot be claimed on this rail yet. It stays readable; voting and pledging are free, and funding is separate from claiming.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.

Other acts: vote, pledge, fund

Pledge backing, free

Packet WORK_1785463429147_1s3rzhv