intermediate work · a public county road right of way in the South Texas Coastal Sand Plain near Kingsville, TX 78363, Kleberg County (a live-oak motte segment), or a resident's own rural property with the owner's consent
Plant native cover in a live-oak motte near Kingsville, site 5, a public county road right of way in the South Texas Coastal Sand Plain near Kingsville, TX 78363, Kleberg County (a live-oak motte segment), or a resident's own rural property with the owner's consent (2026-07-31)
Plant native cover in a live-oak motte near Kingsville, site 5, a public county…. Fund it for $165. Proof lands on-chain when it's done.
The survey above found a bare or thinned-out live-oak motte segment near Kingsville, and hand planted native seedlings and understory species would otherwise leave this coastal sand-plain feature open to erosion and weed cover for another season. Standard: USDA NRCS conservation practice standard 643 restoration of rare or declining habitats plus standard 612 tree and shrub establishment (coastal sand-plain live-oak motte, the distinctive scattered live-oak grove island feature on the wind-blown coastal sand sheet), applied here to a segment near Kingsville, TX, Kleberg County, South Texas Coastal Sand Plain. SDG 15.1 and 15.5. Proof: owner or right of way consent record plus before after photos plus species and plant count record plus GPS Method (USDA NRCS conservation practice standard 643 restoration of rare or declining habitats plus standard 612 tree and shrub establishment (coastal sand-plain live-oak motte, the distinctive scattered live-oak grove island feature on the wind-blown coastal sand sheet), applied here to a segment near Kingsville, TX, Kleberg County, South Texas Coastal Sand Plain. SDG 15.1 and 15.5.): 1. 1. Confirm the segment with the property owner, the university grounds office, or the county road department if on the right of way, and photograph the bare or grazed-out motte before starting. 2. 2. Hand dig small planting holes only, hand tools only, no power equipment, without disturbing the surrounding motte canopy roots. 3. 3. Hand plant native live-oak seedlings and motte-understory species suited to the coastal sand plain (live oak, coma, spiny hackberry) at the labeled spacing. 4. 4. Hand mulch around the new plantings and photograph the planted segment from the matching before vantage, recording species and plant count. Done when: Written or recorded permission from the property owner, or confirmation the work stayed on the public road right of way or campus grounds; Before photo of the bare or grazed-out segment; Confirmation only hand tools were used and the surrounding motte canopy roots were not disturbed; Native species and plant count recorded; After photo of the planted segment from the matching vantage
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 45–120 minutes. Method of record: Point-count / transect species survey (Breeding Bird Survey + Xerces pollinator-count protocols)
Bring
- binoculars
- field ID guide or app
- GPS phone
- data sheet / recorder
- timer
- camera
Steps
- 1. Navigate to the first survey point; record GPS; note start time, weather, and wind (surveys pause in rain/high wind).
- 2. Wait a settling minute, then run a fixed-duration count (e.g., 5 min) within a fixed radius; record every species seen/heard and the count of each.
- 3. Photograph the habitat and any species you can; note any threatened/target or invasive species.
- 4. Move to the next point along the transect (keep points >=200 m apart) and repeat the count.
- 5. Record total effort (points, duration) and observer.
- 6. Enter the per-point species lists + counts, GPS, weather, effort, and photos into the proof record; sign.
If it does not match the plan
- Threatened/at-risk or target species observed -> flag for the land steward (with location) for protection planning.
- Invasive species dominant / native diversity very low -> flag for a management plan.
- Rain or high wind -> pause/reschedule; counts under poor conditions are not valid.
What counts as done
- Written or recorded permission from the property owner, or confirmation the work stayed on the public road right of way or campus grounds
- Before photo of the bare or grazed-out segment
- Confirmation only hand tools were used and the surrounding motte canopy roots were not disturbed
- Native species and plant count recorded
- After photo of the planted segment from the matching vantage
Proof is measured against these, not judged by taste.
Funding this work is a purchase or a vote, same act: you either want this done here, or you want the world to contain it. Either way the money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1785510990884_klmqz3k","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.