Anyone can start here · resident homes in Riviera, TX 78379, Kleberg County (own home)

Install low flow fixtures at a resident's own home, home 4, resident homes in Riviera, TX 78379, Kleberg County (own home)

Install low flow fixtures at a resident's own home, home 4, resident homes in…. Fund it for $85. Proof lands on-chain when it's done.

This home still runs standard flow faucet aerators and showerheads, driving up the household's water bill for no benefit over a WaterSense rated swap in this Kleberg County community. Standard: EPA WaterSense fixture flow rate and leak audit plus drip irrigation retrofit practice, SDG 6.4 water use efficiency, applied here to household water use in Kingsville, TX, Kleberg County. Proof: homeowner or resident permission record plus before after photos plus flow rate measurement plus WaterSense label photo plus GPS Reference method for the water_efficiency standard (EPA WaterSense fixture flow-rate + leak audit, ~45-90 min): 1. Confirm the address; get a staff escort; photograph each fixture group. 2. Measure flow rate at each faucet/shower with the bag-and-timer method; record gallons per minute (gpm). 3. Test each toilet for leaks with a dye tablet (wait 10 min, check for color in the bowl); record flush volume. 4. Inspect fixtures, meters, and irrigation for visible leaks/drips; note each. 5. Read the water meter with all fixtures off; note any movement (indicates a hidden leak). 6. Rank WaterSense fixture upgrades + leak repairs by estimated water/cost savings. 7. Record flow rates, leak results, meter check, ranked measures, and photos into the proof record; sign. Equipment: flow-rate measurement bag + timer, toilet dye tablets, moisture meter, GPS / address, camera, tablet / data sheet Done when: Written or recorded permission from the resident; Before photo of each existing fixture; WaterSense rated replacement label or model photo; After photo of each installed fixture with a flow rate measurement confirming the WaterSense maximum

Where: resident homes in Riviera, TX 78379, Kleberg County (own home)
Pay: $85 proposed
This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.
Proof: homeowner or resident permission record plus before after photos plus flow rate measurement plus WaterSense label photo plus GPS
This is exactly what gets it approved. Nothing settles without it.
Level: entry
Open until: 2026-08-30

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 45–90 minutes. Method of record: EPA WaterSense fixture flow-rate + leak audit

Bring

flow-rate measurement bag + timer
toilet dye tablets
moisture meter
GPS / address
camera
tablet / data sheet

Steps

1. Confirm the address; get a staff escort; photograph each fixture group.
2. Measure flow rate at each faucet/shower with the bag-and-timer method; record gallons per minute (gpm).
3. Test each toilet for leaks with a dye tablet (wait 10 min, check for color in the bowl); record flush volume.
4. Inspect fixtures, meters, and irrigation for visible leaks/drips; note each.
5. Read the water meter with all fixtures off; note any movement (indicates a hidden leak).
6. Rank WaterSense fixture upgrades + leak repairs by estimated water/cost savings.
7. Record flow rates, leak results, meter check, ranked measures, and photos into the proof record; sign.

If it does not match the plan

Meter moving with all fixtures off AND active water damage (wet drywall, ceiling stain, pooling near electrical) -> STOP: possible electrical exposure; keep clear, route to a licensed plumber (and electrician if water contacts wiring). The agent documents, never opens walls.
Suspected cross-connection / backflow risk (hose-bib, irrigation, boiler makeup) -> flag for a licensed plumber backflow test; potable-water contamination is a health hazard — do not test-operate the connection.
Toilet dye migrates into the bowl -> flag a leaking flapper/valve for repair.
Meter moves with all fixtures off -> flag a hidden leak for investigation.
Faucet > 2.2 gpm or showerhead > 2.0 gpm -> recommend a WaterSense upgrade.
No electrical/gas work; documentation only — flag suspected pipe damage, do not disassemble.

What counts as done

Written or recorded permission from the resident
Before photo of each existing fixture
WaterSense rated replacement label or model photo
After photo of each installed fixture with a flow rate measurement confirming the WaterSense maximum

Proof is measured against these, not judged by taste.

The standard this serves

Water Efficiency. Water efficiency is the quiet discipline of wasting nothing indoors. The EPA's WaterSense program sets the marks: how many gallons a minute a faucet should pass, how to find the leak that runs a toilet all night, how a household's water bill tells a story. Mastery looks like an auditor who can walk a home in an hour and find every hidden gallon. The skill is built one fixture at a time, which is exactly what this packet asks: measure one flow, find one leak, record one truth about where the water goes.

Claim it on the board Fund this work · $85

Funding this work is a purchase or a vote, same act: you either want this done here, or you want the world to contain it. Either way the money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1785511414422_ez4etk3","funderWallet":"0xYOU"}.

Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.